DZ Low Pressure Die Casting Machine Continuous Casting Plant Copper Faucet Making Machine

Ⅰ ABOUT LOW PRESSURE DIE CASTING MACHINE

In low pressure casting process molten metal is filled directly from the holding or casting furnace into the dies and sand mould from below, with low turbulence and an absolutely controlled filled casting process.

Low pressure die casting machines for brass for the casting of sanitary fittings, faucets, water meter or valve bodies.

To fulfill the different capacity requirements, a full range of machines with one or two manipulators and one, two or three riser tubes can be supplied. We deliver the machines with freely programmable Siemens control.

Ⅱ ADVANTAGES OF TWO MANIPULATORS LOW PRESSURE DIE CASTING MACHINE

Fully automatic machine with two manipulators mounted on a rotary turning device and one furnace for the cost-effective production of high-quality casting products.

1) Capacity per shift (8 hours): 600-700 castings.

2) Automated operation. Energy-saving, environmentally friendly and efficient production with low melting loss.

3) Features

A. 2 manipulators on a rotary device, operated independently. Operating Parameters can be edited independently. Two manipulators are working at the same time or one set changes the die while the other set is under maintenance;

B. Multiple riser tubes with high production output and flexible die design;

C. Quick die change flanges;

D. Simple control system;

E. Graphite and die with temperature display and storage;

F. Automatic unloading, automatic sorting of different castings;

G. Drive by servo motor, with high precise, stable and efficiency performance;

H. Large volume furnace with less variation in furnace temperature during feeding;

I. Max die dimensions:

LD-5040-D 600*400*240mm;

LD-7050-D 800*500*240mm.

Ⅲ TECHNICAL PARAMETERS