8 Axis CNC Tube Pipe H beam Angle Steel Plasma Cutting Machine Model CPC5013
Product description:
It is the latest high-efficiency and high-precision pipe automatic cutting equipment. It is mainly used for cutting various low carbon steel, stainless steel, copper, aluminum and other pipes. . It can cut the end surface of the round pipe, the intersection of the circular pipe and the plane, and the various round and round pipes, the surface of the round pipe and the spherical surface, the pipe and the curved surface, the H-shaped steel channel steel, the rectangular pipe and the square pipe. The model is beautiful in appearance, compact in structure, stable in operation and easy to operate. The cutting pipe diameter ranges from 50 to 320mm and the cutting pipe length ranges from 9m.
The mechanical part of the machine is mainly composed of a work table, a power chuck and a cutting head. The worktable and the power chuck adopt the overall design and mechanically complete machining, so that the longitudinal guide rail and the shaft of the power chuck are kept parallel, which greatly improves the working precision of the machine. Two parallel linear guide rails are mounted on the side of the table, and precision racks are mounted between the guide rails. The gears are driven by the drive system on the moving body to realize the longitudinal gear and the rack drive. The power chuck drives the chuck to rotate through the servo motor and the timing pulley, and the work piece is driven by the chuck to realize the forward and reverse rotation. The cutting head is controlled by a dual servo motor for axial and radial deflection. The linkage of these motion axes is controlled by the system to achieve the cutting of the intersecting lines of the tubes.

Environment for Equipment:
(1) Ambient temperature: -10-50 °C
(2) Ambient humidity: monthly average humidity ≤ 80%
(3) Power supply: control system power input 220V±10% 50HZ 380V±10% 50HZ
(4) Gas source: oxygen + acetylene or oxygen + propane (preheated oxygen ≥ 0.7Mpa, cutting oxygen ≥ 1Mpa, gas ≥ 0.05Mpa)
(5) Protective gas: air, oxygen, air pressure 8.3bar, flow rate 8 cubic meters / hour.
(6) Installation site: indoor installation, concrete foundation, requiring the ground to be level, the inclination is not more than 1/100

Main technical parameters of the equipment:
1. Cutting steel pipe specifications

• Equipment movement axis and range of motion

3. Cutting machine steel pipe loading method
The round tube adopts 4-claw chuck type structure, multiple sets of long-axis roller frame, the active frame drives the maximum pipe weight of 3.5tons, and the minimum spacing of the roller frame roller: 400MM (end part), which can support the minimum straightness of 800MM long. Pipe of the pipe section.

4. Cutting speed

5. The torch repeating positioning accuracy
≤ ± 0.03mm; bus positioning accuracy ≤ ± 0.03mm; groove positioning accuracy ± 0.05 °
6. Equipment power

The software can now generate and cut the following types of tube cutting nodes:
a. The pipe is cut vertically or obliquely.
b. The end of the pipe is slotted. You can open the groove of the width and length you require at the end of the pipe according to the parameters you set.
c. Holes of various shapes are opened on the tube. As long as you can use CAD to draw the shape of the hole you want to open (temporarily only supports straight lines. Arc and circle objects), the software can project the shape drawn onto the tube wall to open the same shape of the hole.
d. The tube cut flower function can be cut out on the tube according to the drawing drawn by the user, so as to achieve the purpose of cutting any pattern.
e. Various intersecting wire holes to be opened on the pipe. The software can automatically generate intersecting line holes that need to be opened on the main pipe due to the branch pipe according to the relative position of the main pipe and the branch pipe.
f. Various intersecting wire holes are required to open the tapered pipe on the pipe.

Software advantages detailed description:
a. Support TEKLA professional design software 3D round tube entity seamless docking
b. Automatically name processing code by number
c. Automatically optimize tekla rough trajectory curve
d. Select batch output in batches
e. End face, hole, slot can be set separately and output once
f. One-click generation of processing code
g. Batch generation automatic numbering
h. Layered display of multiple trajectory curves