DRP-240-48 single output DIN rail power supply 240W 48V 5A
Features:
1. Full range AC input
2. Protection: Over voltage, over current, short circuit protection
3. Heat from the cold
4. 100% full-load burn-in test
5. Installation Guide: TS-35/7.5 or TS-35/15
6. High quality and low price
Specification:
Model number | DRP-240-12 | DRP-240-24 | DRP-240-48 |
DC Output Voltage | 12V | 24V | 48V |
Output Voltage Error | ± 1% | ± 1% | ± 1% |
Rated Output Current | 20A | 10A | 5A |
Output Current Range | 0-20A | 0-10A | 0-5A |
Ripple and Noise | 120mVp-p | 80mVp-p | 150mVp-p |
Inlet Stability | ± 0.5% | ± 0.5% | ± 0.5% |
Load Stability | ± 1% | ± 1% | ± 1% |
DC Output Power | 240W | 240W | 240W |
Efficiency | 84% | 84% | 85% |
Adjustable Range for DC Voltage | ± 10% | ± 10% | ± 10% |
AC Input Voltage Range | 85~132VAC/170~264VAC 47~63Hz | ||
Input Current | 2.8A/115V 1.4A/230V | ||
AC Inrush Current | Cold-Start Current 27A/115V 45A/230V | ||
Leakage Current | <3.5mA/240VAC | ||
Overload Protection | 105%~150% Type: Cut Output, Reset: Auto Recovery | ||
Over Voltage Protection | 115%~135% | ||
High-temperature Protection | 100°C±5°C(0~50°C) shut down output | ||
Temperature Coefficient | ± 0.03% /°C (0~50°C) | ||
Start, Rise, Hold time | 800ms, 40ms, 24ms | ||
Vibration | 10~500Hz, 2G 10min/1 cycle, a total of 60 minutes, Each axes | ||
Withstand Voltage | Input and Output Interval: 1.5KVAC, Input and Enclosure: 1.5KVAC, Output and Enclosure: 0.5KVAC | ||
Isolation Resistance | Input and Output Interval: Input and Enclosure, Output and Enclosure: 500VDC/100M Ohms | ||
Working Temperature and Humidity | -10°C~+60°C, 20%~90%RH | ||
Dimension | 125.5*125.2*100 mm | ||
Weight | 1.2kg |
Dimension unit:mm