2EDGRH-3.81 3.81mm Phoenix Pluggable Terminal Block Connector Male For Pcb

Product Specifications

Product Application

• industrial controls

• lamp lighting

• instrumentation

• consumer electronics telecom equipment

• transportation

How to use 3.81mm pitch terminal block ?

The 2EDGRH-3.81 3.81mm Phoenix Pluggable Terminal Block Connector Male, specifically designed for PCB (Printed Circuit Board) applications, offers a seamless and secure method for integrating into your electronic systems. Here's a detailed guide on how to insert and wire this connector onto your PCB:

Preparation

1. Ensure Compatibility: Verify that the 2EDGRH-3.81 connector is compatible with your PCB design, including the pin pitch (3.81mm) and any specific mounting requirements.

2. Tools Required: Gather the necessary tools, such as a precision screwdriver (if applicable), wire strippers, and a crimping tool (if using pre-crimped wire terminals).

3. Prepare Wires: Strip the insulation from the ends of your wires to expose the bare conductors. Ensure the exposed length matches the terminal block's requirements for a secure connection.

Insertion onto PCB

1. Locate Mounting Points: Identify the designated mounting holes or soldering pads on your PCB where the 2EDGRH-3.81 connector will be installed.

2. Mount the Connector: Depending on the design, the connector may be mounted either through soldering or using screw-down mechanisms.

   • Soldering: If soldering is required, carefully align the connector over the soldering pads. Use a precision screwdriver or tweezers to hold the connector in place while soldering each pin to the corresponding pad.
   • Screw-down Mechanism: For screw-down versions, insert the connector into the mounting holes and secure it using the provided screws, tightening them gradually to avoid damaging the PCB or connector.

Wiring the Connector

1. Insert Wires: With the connector securely mounted, insert the stripped ends of your wires into the appropriate terminals. The terminals are typically color-coded or numbered for easy identification.

2. Secure the Connections: Depending on the design of the terminal block, you may need to crimp pre-crimped terminals onto your wires before insertion or use a tool to tighten the screw terminals around the bare wire. Ensure that each connection is tight and secure to prevent loosening or disconnection.

3. Inspect Connections: Visually inspect each connection to ensure that wires are properly seated and terminals are fully engaged. Check for any exposed wire strands that may cause shorts or other hazards.

4. Test Functionality: Before closing up your system, perform a functional test to verify that the connector and its wired connections are operating correctly. This may involve powering up the PCB and checking for proper signal flow or power delivery.

Final Notes

• Always follow the manufacturer's instructions and safety guidelines when working with electrical components.
• Ensure that all power sources are disconnected before performing any wiring work to avoid the risk of electrical shock.
• Use appropriate personal protective equipment, such as safety glasses and insulated gloves, when working with electrical components.

By following these steps, you can easily and safely insert and wire the 2EDGRH-3.81 3.81mm Phoenix Pluggable Terminal Block Connector Male onto your PCB.

Drawing

2EDGRH-3.81.pdf

Package Details

• Pluggable Terminal Blocks: Inner Box first , then Inner Carton, The last, Export Carton.

Take strong bags/boxes/cartons for the package, in order to reduce the damage during the shipments. Tape and reel packing, Clamshell packing, Pallet packing, etc are available.

• Export Carton size:43*27*27/36CM

• Port: NINGBO/SHANGHAI

FAQ

Q: The nature of the company (factory/trading)?

A: Integrated industry and trade.

Q: Packing details of the product?

A: Use a special export carton, which is stronger, and the weight of a single piece does not exceed 25KG (by air).

Q: The customs code of the product?

A: 8536901900.

Q: The mass production time of the product?

A: Usually 2 weeks - 4 weeks.

Q: Is the sample provided for free, and the sample delivery date?

A: Small amount samples can be given away for free, and samples can be delivered within 3-5 days.

Q: Does the product support OEM customization?

A: YES.

Q: Do you support MOQ?

A: YES.

Q: Is there a product quotation or electronic sample catalog?

A: Customers need it at any time and can provide it at any time.

Q: Does the company have quality control standards and corresponding management systems?

A: Of course.

SHIPMENTS