Introduction

1104 Linear style Magnetic Lockable Ball Valve is a multi-functional model specially designed for applications in HVAC (Heating, Vetilation, Air-Conditioning) and water supply piping systems. Besides of the general advantages of a normal ball valve, it also provides the bottom outlet to attach a thermometer / pressure gauge or a combined one to detect the internal fluid temperature and/or pressure without dismantling the valve or pipeline. Furthermore, the built-in stainless steel strainer in the water way will block the debris which may be harmful to the downstream devices.

Type A magnetic lock cap and tool kit

***Unlock: Fix the Lock cap by hand, insert the key into the lock hole to the very end, turn the key 90° clockwise to unlock the lock cap and take it out. At this status, the Key can not be pulled out from the lock hole. Then use the tool to open or close the valve.

***Lock-up: Put the unlocked Lock cap into the very end of the valve hole, turn the key 90° counterclockwise to fix the Lock cap well in the valve hole. Now you can pull out the key freely.

Type B magnetic lock cap and tool kit

***Unlock: When position the tool with Mag. End at the downside, insert the round flat of mag. end into the dent of the B type mag. Lock cap and rotate the tool a little bit till the Lock cap can be pulled out. Then use the tool to open or close the valve.

***Lock-up: With the Lock cap stick to the Mag. end at Unlock status, put it back into the valve hole till the cap's top is a little bit lower than the valve hole's, then quickly remove the mag. end to lock up.

Type C mechanical code lock cap and tool kit

***Unlock: Use a screwdriver to tune each numeric wheel one by one till the 5 digits exactly match the pre-set codes. Then take out the Lock cap from the valve hole. Now use the tool to open or close the valve.

***Lock-up: Put the unlocked Lock cap back into the valve hole till its top is a little bit lower than the valve hole's, then change one or several or all of the 5 numerics by tuning the numeric wheel(s) accordingly with a screwdriver to lock up.