ZC-SC101H |
General lnformation |
Description |
It is a type of warm water cross linking material applied to low voltage wires and cables.
It possesses following advantage: good electrical properties and anti-aging ability;
excellent tensilestrength and low-temperature brittleness properties. In addition,
the highest continuous workingtemperature is 125℃.
This grade is compliant to EN 50618 and passed all properties except the20,000 hours aging test. |
|
Application: |
it is used for the insulation of solar cables |
|
Specifications |
High temperature resistance XLPO Compound for wires and cables up to 3KV. |
|
Specification Sheet |
Product Properties |
|
Unit |
Test method |
Standard
Value |
Typical
Value |
|
|
Nation |
International |
Physical |
|
Gel content |
% |
GB/T 10437-2004 |
┄ |
┄ |
65 |
Density |
g/cm3 |
|
ASTMD 792 |
|
0.917 |
Mechanical |
|
Tensile strength |
Mpa |
GB/T 1040-2006 |
ISO 527:1995, |
┄ |
24 |
Elongation at break |
% |
IDT |
┄ |
450 |
Brittleness temperature
(-76℃,30pieces) |
Piece |
GB/T 5470-2008 |
ISO 974:2000 |
┄ |
0 |
MOD |
|
|
Thermal |
|
Hot set
elongation
(200℃,
0.2Mpa,
15min) |
Elongation
under load |
% |
GB/T2951.21-2008 |
IEC
60811-2-1:2001,
IDT |
┄ |
50 |
Permanent
deformation
after cooling |
% |
┄ |
0 |
Ageing
(150℃,
240h) |
Change of
tensile strength |
% |
GB/T2951.12-1997 |
IEC
60811-2-1:2001,
IDT |
┄ |
+2 |
Change of
elongation |
% |
┄ |
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product Properties |
|
Unit |
Test method |
Standard
Value |
Typical
Value |
|
|
Nation |
International |
Thermal |
|
DC volume resistivity (20℃) |
Ω·m |
GB/T 1410-2006 |
ISO 60093:1980 |
┄ |
1.0x1015 |
IDT |
Dielectric Strength (20℃) |
MV/m |
GB/T 1408.1-1999 |
IEC 602431:1998 |
┄ |
38 |
IDT |
Dielectric constant (20℃,50HZ) |
┄ |
GB/T 1409 |
IEC 60250:1969,
MOD |
┄ |
2.20 |
Dissipation factor (20℃,50HZ) |
┄ |
┄ |
30x10-4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Information |
Processing Techniques: |
Melt extrusion temperature in the range of 150℃ to 220℃ are recommended, the specifictemperature
should be adjusted by actual operation condition. |
|
Cross-linking: |
Cross-linking condition and time of the hot set elongation to 100%(1mm thick samples);vapor or water bath
at 90℃ for 6Omin or at 80℃ for 120min. |
Package.Storage and Transport: |
Package |
Net weight |
the A and B groups are kept in different bags, net weight ofA group is
( 23.75土0.02) kg and B group ( 1.25+0.02) kg |
Method |
aluminium foil / polyethylene complex film bag for inner+
PP woven bag/PE/ Kraft paper bag for outer |
Transport |
Requirement |
keep away from the sunshine, rain and soaking duringtransport,
as well as handle gently during carrying |
Storage |
Environment |
clean, dry and ventilated warehouses |
Warranty |
6 months |