HMRBVT01 Tracked Fire fighting Robot Chassis
Product Description:
The tracked fire-fighting chassis vehicle can replace firefighters and rescuers to enter the scene of dangerous disasters such as inflammable, explosive, toxic, anoxic and smoke, and effectively solve the personal safety problems faced by firefighters in the above-mentioned places. Simple body design for smoother operation, cooperated with high-power DC geared motors to make obstacles especially easy.
Function: Fire fighting
Product Feature:
1. Remote control of fire gun rotation, pitch, high range, large flow and other injection methods
2. Double water belt supply, large flow
3. The chassis body is waterproof and waterproof. IP65
4. Chassis height exceeds 170mm, with superior climbing and obstacle resistance
5. The steering radius is extremely small and can be turned in place.
6. Large support area, 150mm track width, suitable for complex environment operation such as soft and muddy
The sink degree and rolling resistance is small, and the off-road maneuverability is good.
Product Picture:
Fire chassis parameters
Item Specification | ||
Power | 48V DC brushless motor (with brake) | |
Suspension system | Christie suspension | |
Working temperature | -20℃~60℃ | |
Rated power | 2KW*2 | |
Rated torque | 210Nm | |
Running speed | 0~1.2m/s(infinitely variable speed) | |
Maximum obstacle | 200mm | |
Maximum climbing | 35 degrees (can climb stairs) | |
Remote control distance | LOS 500M(Larger distance can be customized) | |
Endurance Capability | 2h | |
Remote control function | Remote control box control | |
Size | Dimensions | 1540*845*920mm |
Chassis height | 170mm | |
Track width | 150mm | |
Grounding length | 2016mm | |
Wading depth | 400mm | |
Cool Down | Double water curtain spray | |
Audible alarm | With | |
Weight | Self Weight | 320kg |
Load Weight | 200kg(Can drag 2pcs diameter φ80 water-filled water belt with 60 meters) | |
Material | Wheel | Aluminum alloy |
Vehicle Body | Square tube | |
Track | High quality rubber with Kevlar fiber embedded | |
Surface treatment | Spray/partial spray paint | |
Battery | Type | Lithium battery |
Capacity | 100AH | |
Voltage | 48V |
Can add 40, 80 water cannons, choose one,Alternative
Motor parameters
40 water cannon parameters:
Item Specification | |
Fixed work pressure | 0.8Mpa |
Working pressure range | 0.5~1.0Mpa |
Range (elevation angle 30°) / water | ≥65m |
Range (elevation angle 30°) / foam | ≥60m |
Maximum spray angle | 120° |
Pitch angle | +30~+70° |
Electric power source adopted | 24V |
Connection method | RRR333235UUΦ80 Middle Press card type interface |
Φ80 Internal button interface |
80 water cannon parameters
Item Specification | |
Fixed work stress | 0.8Mpa |
Working pressure range | 0.5~1.0Mpa |
Range (elevation angle 30°) / water | ≥85m |
Range (elevation angle 30°) / foam | ≥80m |
Maximum spray angle | 120° |
Pitch angle | +30~+70° |
Electric power source adopted | 24V |
Connection method | Φ80 Middle Press card type interface |
Φ80 Internal button interface |
Remote use instructions
1.Be sure to read this manual before using this equipment.
2.Built-in DC12 lithium battery. When the power is too low, please charge it with a dedicated charger.
3.The inside of the device is an electronic component, which prevents incorrect operation such as heavy pressure and severe vibration during transportation and storage.
4.Please do not disassemble the internal components of the product to avoid affecting the usage.
5.Install the 5.8G antenna before turning on the power to prevent the video transmission components in the device from being burned out.
6.Please do not use it in an environment that exceeds the temperature, humidity, pressure, etc. defined by this product.
Our Servive:
1. Lifelong maintainance
2. 24 hour technical support
3. Strong R&D capability; Customized project is welcomed
4. High quality product with competitive price,short delivery time and responsible after-sale service
Our Factory: