FDD-COFDM 10-20Mbps Ethernet COFDM TCP/IP/UDP signal transmission for NLOS range
Main Features
Specification
Transmitting & receiving all in one Device
Modulation | Woring Frequency |
Tx: 300Mhz~2700MHz(1Mhz for 1 setp) Rx: 300Mhz~860MHz(1Mhz for 1 setp) |
Channel Processing Mode | FDD | |
Modulation and Demodulation Mode | COFDM | |
Error Correction | FEC | |
COFDM carriers | 2K | |
Bandwidth | 1/2/4/8MHz | |
Output power | 5-40watts for adjustable | |
System | Transmission mode | Full-Duplex |
Transmission Protocol | Standard TCP/IP, transparent transmission, asynchronous serial data | |
Transmission type | 10/100Bate-T, Ethernet self-adapting, industrial RS-232, RS-422, RS-485 standard interface | |
Transmission rate |
5-20Mbps 1-2km NLOS: 5-10Mbps 200meters-1km NLOS: 10Mbps 20-30km air to ground: 5-10Mbps |
|
Transmission delay | 10-30ms | |
Error rate | ≤10-6 | |
Transmission distance | 1km-2km NLOS ground to ground 15km to 20km air to ground |
|
Receiving sensitivity | -102dBm | |
Receiving mode | Omni | |
Mode of application | Manpcak | |
Other | RF interface | N-type Female |
Ethernet interface | Two RJ45 Ports with connection indicator light | |
Signal strength | LCD to display and parameters adjustable | |
Power supply | DC 12V/5A | |
Power Consumption | 35watts | |
Operating humidity | No less than 95% (Non - Condensing) | |
Power switch | Press lock with light switch | |
Dimension | 186×126×58mm (L×W×H) | |
Weight | 1.2KG |