2W COFDM 2.3-2.5GHz Drone Video Data Transmitter with Dual IP Camera and Serial Port
Introduction:
ST20NPT is a mini-controller device, specifically designed for commercial & industrial drones.
It enables controlling a drone as well as transmitting or viewing of video and data while operating on air & ground missions.
Features:
Advantages:
ST20NPT is an ideal Ethernet COFDM Radio for mobile long range video data wireless communication, it is able to manage IP cameras. It also support double serial data transmission, it not only transmit Pixhawk temetry, but also can transmit PTZ control signal.
Parameter
Frequency | 2.4GHz(2402MHz-2482MHz) |
RF Transmitting Power | 33dBm(air to ground 18-22km) |
Frequency Bandwidth | 2/4/6/8Mhz |
Antenna | 1T1R |
Adjustment mode of bit rate | Software adjustment |
Communication Channel Encryption | WEP, WPA(PSK), WPA2(PSK), WPA+WPA2 (PSK), AES 256 |
Transmission Mode | point to point |
Start-up time | < 30s |
Error Detection | LDPC FEC |
Two-way function | Support IP video and duplex data simultaneously |
Data | Support SBUS/PPM/TTL/232/MAVLINK TELEMETRY |
Ethernet Protocol | TCP/IP/UDP |
Transmission Rate | 3-5Mbps |
Sensitivity | -100dbm@4Mhz -95dbm@8Mhz |
Power | DC 7-18V |
Power Consumption | TX: 16Watts |
RX: 5Watts | |
Temperature | Operating temperature: -40°C - +85°C |
Storage temperature: -55°C - +100°C | |
Serial Port | Double Serial ports for bi-directional data and playload |
Interface | Power input interface × 1 |
Antenna interface × 2 | |
RS232 Bidirectional Port × 1 | |
Ethernet to USB / RJ45 on Windows × 1(TX), Ethernet Port x2(RX) | |
Indicator | RJ45 input/output indicator light |
Transmitting and receiving indicator light | |
Transmitting and receiving indicator light | |
Power light | |
Appearance Design | CNC technology/ double aluminum alloy shell with waterproof design |
Size | Tx/ Rx: 76*73*24mm |
Net Weight | TX: 146g |
Rx: 146g |