Servo Driven Electronic Tensioner For Motor Coil / Drive Coil ST600D-18
Description
The servo wire tension unit uses the wire feeding method for high speed
winding control. by replacing the spring to change its tension value,
this product comes with tension feedback stabilization system that can
automatically tension stable equilibrium and with particular stable
tension and easy to adjust.
The feedback system will monitor the tension and make changes to the feeding
speed to maintain the set tension level even during rapid acceleration and to
prevent any sudden change in the tension when winding non-round shaped coils.
One model covers a wide range of tension values for maximum efficiency and
cost-effectiveness while still giving fine control of tension adjustment.
Product Features:
Feed the wire automatically ,and all using high-precision encoder servo motor,
A, With high precision ,stable tension and fast speed ,
B, High speed torque
C, Low Noise
Main Parameters:
Voltage : DC36-48V
Power : 100W (9,18m/s)
Mounting hole : Ф 16mm
Weight : 2.4kg
Product size :265*170*75(mm)
Specification :
Part.No. | Product Model | Maximum wire speed | Tension Stage | Tension Scope | Applied wire diameter | Tension Rod |
(g) | (mm) | |||||
1 | ST600D-18 | 18m/s | one stage | 3-600 | 0.02-0.3 | TR-25#-200 TR-26#-120 TR-27#-150 |
2 | ST800-18 | 18m/s | two stage | 3-800 | 0.02-0.4 | |
3 | ST2000-9 | 9m/s | two stage | 300-2000 | 0.2-0.8 | TR-28#-150 |