Head Physical Therapy Equipment Cryo Therapy Pain Relief Device

The Physical Therapy Equipment Cryo Therapy Pain Relief Device is an integrated approach to cold therapy that combines cold and focal compression delivered using a non-motorized, gravity-fed system. if you do not want to manually raise and lower the unit, the air pump is optional to achieve auto circulation. It delivers chilled water directly into a Cryo/Cuff that is anatomically designed to provide maximum cryo therapy, eliminating the risk of tissue damage. The cooler is filled with special thermal insulation foam among the cavity to prevent this for a longer cold. Treatment time and pressure level are adjustable, and compared to traditional ice pack or cold wraps, the head surface coverage is increased, the cold therapy provided is constant and more stable. it is ideal for minimizing hemarthrosis, swelling, managing pain, post-operative recovery, trauma, rehabilitation and sports injuries.

Components:

All Cryo/Cuffs can be ordered as a single cuff, or with a cooler (including a tube assembly and pump system ). The Cooler is available separately and can be used with any model in the Cryo/Cuff line.
Cuff: covers the body part(include 9 parts,such as the head, shoulder, elbow, hand and wrist, back, knee, leg, ankle) with pressured ice water
Cooler: High:29cm,Diameter:19cm,Measures:3.87L, holds enough water and ice for 6-8 hours of cryotherapy
Tube: exchanges the water between cuff and the cooler
Automatic Circulation System: make the water in the cooler flow into the cuff intermittently

About product:

*It is a combination of cryotherapy and static compression, commonly uses for the treatment of pain and inflammation after acute injurry or surgical procedure.

*Gravity Cooler holds water and ice needed to provide 6 to 8 hours of cryotherapy; Compatible with all Cryo/Cuff and Arctic Flow pads.

*Delivers chilled water directly into a Cryo/Cuff that is anatomically designed to provide maximum cryo therapy, eliminating the risk of tissue damage.

*Far more than just a modified cooler, it was designed holistically, with unique features like a locking lid to help prevent spills and insulated walls for improved cooling.

Operation:

1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.

to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.

2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.

3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.

4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.