Neck Cervical Cold Compression Therapy Machine Cryo Cuff Wrap

This Cold Compression Therapy Machine is an easy to use device that circulates ice cold water with compression to provide cold therapy in the treatment of injuries. It is ideal for post-operative recovery, trauma, athletic training rooms, and home use. Compared to traditional practice of ice packs, the machine provides more stable and constant cold therapy to affected body area with help of cavity wall insulation in cooler. Compression makes the wrap tight fit and the cold therapy penetrates deeper. The air pump (optional) can automatically circulate ice water between cooler and cuffs.

Components:

Cuff: covers the affected body part(include 9 parts including head, shoulder, elbow, hand, wrist, back, knee, leg and ankle) with pressured ice water
Cooler: High:29cm,Diameter:19cm,Measures:3.87L, holds enough water and ice for 6-8 hours of cryotherapy
Tube: exchanges the water between cuff and cooler
Automatic Circulation System: make the water in the cooler flow into the cuff intermittently

Cryo Cuffs can be ordered alone, or with a cooler (including a tube assembly and pump system ). The Cooler is available separately and can be used with any model in the Cryo/Cuff line.

About product:

*It is a combination of cryotherapy and static compression, commonly uses for the treatment of pain and inflammation after acute injurry or surgical procedure.

*Gravity Cooler holds water and ice needed to provide 6 to 8 hours of cryotherapy; Compatible with all Cryo/Cuff and Arctic Flow pads.

*Delivers chilled water directly into a Cryo/Cuff that is anatomically designed to provide maximum cryo therapy, eliminating the risk of tissue damage.

*Far more than just a modified cooler, it was designed holistically, with unique features like a locking lid to help prevent spills and insulated walls for improved cooling.

Operation:

1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.

to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.

2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.

3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.

4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.