Cryo Cuff Physical Cold Therapy System Equipment Knee Pain Relief Machine

Function

1. Knee joint injury recovery physiotherapy Cold pressure physiotherapy machine is a comprehensive cold pressure physiotherapy, using non-motorized, gravity energy supply system, combining cold pressure and local compression. It can be conveniently used when you need it, whether it is after exercise, surgical hand or joint treatment needs.
2. Directly transport the frozen water to the Cryo/Cuff designed according to the anatomical structure to provide the maximum degree of cryotherapy, thereby eliminating the risk of tissue damage. Compression allows cold therapy to penetrate deeply and produce better results.
3. The pressure reducing valve is specially designed to ensure safe use. When the cooler is compressed above 150mmH, it will automatically start to deflate. If you don't want to operate manually, you can also choose an air pump to realize an automatic circulation system. Of course, this air pump can be selected and configured according to your needs.
4. It is an ideal choice for reducing joint bleeding, swelling, pain control, postoperative recovery, trauma, rehabilitation and sports injuries.

Components:

All Cryo/Cuffs can be ordered as a single cuff, or with a cooler (including a tube assembly and pump system ). The Cooler is available separately and can be used with any model in the Cryo/Cuff line.
Cuff: covers the body part(include 9 parts,such as the head, shoulder, elbow, hand and wrist, back, knee, leg, ankle) with pressured ice water
Cooler: High:29cm,Diameter:19cm,Measures:3.87L, holds enough water and ice for 6-8 hours of cryotherapy
Tube: exchanges the water between cuff and the cooler
Automatic Circulation System: make the water in the cooler flow into the cuff intermittently

Operation:

1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.

to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.

2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.

3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.

4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.