Product Description:

The Radio Frequency Plasma Generator has numerous advantages over traditional surgical methods, such as the electric knife and laser. Firstly, the current does not flow through the human body, making it safer for patients. The working surface temperature is only 40 °C to 70 °C, which results in less thermal damage to the surrounding tissue. When used in the recommended energy range, the cutting and ablation depth is controlled to ≤50μm. Secondly, the Radio Frequency Plasma Generator is minimally invasive. It has less heat, reduces tissue thermal damage, reduces wound healing time, and reduces wound bleeding and scar formation. Thirdly, it is highly efficient. The patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During the surgery, the doctor stops bleeding while cutting and does not need other hemostasis tools.

The Disposable Radio Frequency Plasma Generator Probe for TURP is indicated for resection, lysis, plasty, debridement, and ablation on the meniscus. It is also used for the complete or partial resection of the meniscus, meniscus finishing, and repairing. Additionally, it can be used for ligament release or tightening, and for hip/wrist arthroscopy.

In summary, the Disposable Radio Frequency Plasma Generator Probe for TURP is a High Frequency Plasma Generator, Radio Frequency Plasma Reactor, and Radio Wave Plasma Generator that uses plasma technology to provide minimally invasive surgeries. Its advantages include safety, minimally invasive procedures, and high efficiency. Its indications include various surgeries for the knee, shoulder, hip, wrist, ankle, and elbow joints, as well as for meniscus resection, finishing, and repairing, ligament release or tightening, and hip/wrist arthroscopy.

Features:

• Product Name: Disposable Radio Frequency Plasma Generator Probe for TURP
• Product Category: Radio Frequency Plasma Generator
• Features:
  • Foot switch
  • Imported from Europe
  • Finger switch is optional
  • Single use
  • No carbonization
  • Single pin tip is convenient for ablation and hemostasis of surrounding tissue in wrist and hip joint
  • Total anesthesia
• Working Principle: The plasma technology of Better Health is the plasma energy generated by stimulating NaC in physiological saline with a 10DKHz square wave. The high-speed charged particles in the plasma can break the molecular bonds of the human body, causing proteins and other tissues to decompose and vaporize into low molecular weight gases such as H2,02,CO2,N2,and methane. Under a stable electric field of 100KHz square wave, particles will achieve a longer acceleration time, ultimately forming speed charged particles with kinetic energy, which can break molecular bonds and cause minimal damage to surrounding tissues. The treatment temperature is low, and the processes of cutting, ablation, and hemostasis are completed within 40-70℃.
• Advantages:
  1. Safety: Compared with traditional surgical methods (such as: electric knife, laser), the current does not flow through the human body, the working surface temperature is only 40°C to 70°C, and the surrounding tissue is less thermally damaged. When used in the recommended energy range, the cutting and ablation depth is controlled to ≤50μm.
  2. Minimally Invasive: Compared with traditional surgical methods (such as electric knife, laser), it has less heat, reduces tissue thermal damage, reduces wound healing time, reduces wound bleeding and scar formation.
  3. High Efficiency: Compared with traditional surgical methods (such as: electric knife, laser), the patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During the surgery, the doctor stops bleeding while cutting, and does not need other hemostasis tools.

Technical Parameters:

Applications:

The Better Health Radio Frequency Plasma Generator, model number pk-100, is a state-of-the-art medical device that utilizes the latest plasma technology to provide safe, minimally invasive, and highly efficient surgical solutions. The device is certified by CE and ISO and manufactured in China, with a minimum order quantity of 1 set and negotiable price. It accepts various payment terms, including L/C, D/A, T/T, and Western Union, and has a delivery time of 5-8 days. The product is packaged in a paper carton and has the following parameters: Probe angle of 90°, four pins, article number GK407, 180mm length, and 4.021mm diameter.

The working principle of the Radio Frequency Plasma Reactor is based on the plasma energy generated by stimulating NaC in physiological saline with a 10DKHz square wave. The high-speed charged particles in the plasma can break the molecular bonds of the human body, causing proteins and other tissues to decompose and vaporize into low molecular weight gases such as H2, O2, CO2, N2, and methane. Under a stable electric field of 100KHz square wave, particles achieve a longer acceleration time, ultimately forming speed charged particles with kinetic energy that can break molecular bonds and cause minimal damage to surrounding tissues. The treatment temperature is low, and the processes of cutting, ablation, and hemostasis are completed within 40-70℃.

The Better Health Radio Wave Plasma Generator features a foot switch and is imported from Europe. A finger switch is optional. It is designed for single-use and has no carbonization. The single pin tip is convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint. Total anesthesia is provided.

Compared with traditional surgical methods, the Better Health Electromagnetic Frequency Plasma Generator has several advantages. First, it is safer as the current does not flow through the human body, and the working surface temperature is only 40 ° C to 70 ° C, resulting in less thermally damaged surrounding tissue. When used in the recommended energy range, the cutting and ablation depth is controlled to ≤50μm. Second, it is minimally invasive as it reduces tissue thermal damage, wound healing time, wound bleeding, and scar formation. Third, it is highly efficient as the patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During the surgery, the doctor stops bleeding while cutting, and there is no need for other hemostasis tools.

The Better Health Radio Frequency Plasma Generator is widely used for knee, shoulder, hip, wrist, ankle, and elbow joints, including resection, lysis, plasty, debridement, and ablation. It is also suitable for complete or partial resection of meniscus, meniscus finishing and repairing, and ligament release or tightening. Moreover, it is highly effective for hip/wrist arthroscopy.

Overall, the Better Health Radio Frequency Plasma Generator is an innovative and reliable medical device that provides safe, efficient, and minimally invasive surgical solutions for various applications. Its advanced plasma technology, combined with its unique features and advantages, make it an essential tool for modern medicine.

Support and Services:

Our Radio Frequency Plasma Generator product comes with comprehensive technical support and services, including:

• Installation and commissioning support
• Training on product operation and maintenance
• Remote technical assistance for troubleshooting
• On-site repair and maintenance services
• Product upgrades and customization services

Our team of experienced engineers and technicians are dedicated to ensuring that our customers get the most out of their RF Plasma Generator product. Contact us for more information on how we can support your needs.

Packing and Shipping:

Product Packaging:

• One Radio Frequency Plasma Generator
• One power cord
• Instruction manual
• Protective foam packaging

Shipping:

• Shipping method: Standard
• Processing time: 1-2 business days
• Estimated delivery time: 5-7 business days
• Shipping cost: Free

FAQ:

Q1: What is the brand name of the Radio Frequency Plasma Generator product?

A1: The brand name of the product is Better Health.

Q2: What is the model number of the Radio Frequency Plasma Generator product?

A2: The model number of the product is pk-100.

Q3: What certifications does the Radio Frequency Plasma Generator product have?

A3: The product is certified by CE and ISO.

Q4: What is the place of origin for the Radio Frequency Plasma Generator product?

A4: The product is made in China.

Q5: What is the minimum order quantity for the Radio Frequency Plasma Generator product?

A5: The minimum order quantity for the product is 1 set.

Q6: Is the price for the Radio Frequency Plasma Generator product negotiable?

A6: Yes, the price for the product is negotiable.

Q7: What are the payment terms for the Radio Frequency Plasma Generator product?

A7: The payment terms for the product include L/C, D/A, T/T, and Western Union.

Q8: What is the delivery time for the Radio Frequency Plasma Generator product?

A8: The delivery time for the product is 5-8 days.

Q9: What are the packaging details for the Radio Frequency Plasma Generator product?

A9: The product is packaged in a paper carton.