Product Description:

The RF Plasma Generator Unit is imported from Europe and features a foot switch for easy operation. A finger switch is optional, and the single-use product has no carbonization. Its single pin tip is particularly convenient for ablation and hemostasis of surrounding tissue in wrist and hip joints. Total anesthesia is also ensured.

Compared to traditional surgical methods like electric knives and lasers, the RF Plasma Generator Unit is safer, with the current not flowing through the human body. The working surface temperature is only 40°C to 70°C, and surrounding tissue is damaged less thermally. Cutting and ablation depth is controlled to ≤50μm when used in the recommended energy range. It is also minimally invasive, with less heat, reduced tissue thermal damage, reduced wound healing time, and reduced wound bleeding and scar formation. The patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During surgery, doctors can stop bleeding while cutting, eliminating the need for other hemostasis tools.

The Disposable Radio Frequency Plasma Generator Probe for TURP has a probe angle of 90°, four pins, an article number of GK407, a length of 180mm, and a diameter of 4.021mm. It is a highly efficient and safe Electromagnetic Wave Plasma Generator that provides superior surgical results.

Features:

• Product Name: Radio Frequency Plasma Generator
• Product Category: Radio Frequency Plasma Generator
• Advantages:
  • Safety: Compared with traditional surgical methods (such as: electric knife, laser), the current does not flow through the human body, the working surface temperature is only 40 ° C to 70 ° C, and the surrounding tissue is less thermally damaged. When used in the recommended energy range, the cutting and ablation depth is controlled to ≤50μm.
  • Minimally Invasive: Compared with traditional surgical methods (such as electric knife, laser), it has less heat, reduces tissue thermal damage, reduces wound healing time, reduces wound bleeding and scar formation.
  • High Efficiency: Compared with traditional surgical methods (such as: electric knife, laser), the patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During the surgery, the doctor stops bleeding while cutting, and does not need other hemostasis tools.
• Working Principle: The plasma technology of Better Health is the plasma energy generated by stimulating NaC in physiological saline with a 10DKHz square wave. The high-speed charged particles in the plasma can break the molecular bonds of the human body, causing proteins and other tissues to decompose and vaporize into low molecular weight gases such as H2,02,CO2,N2,and methane. Under a stable electric field of 100KHz square wave, particles will achieve a longer acceleration time, ultimately forming speed charged particles with kinetic energy, which can break molecular bonds and cause minimal damage to surrounding tissues. The treatment temperature is low, and the processes of cutting, ablation, and hemostasis are completed within 40-70℃.
• Features:
  • Foot switch. Imported from Europe. Finger switch is optional.
  • Single use.
  • No carbonization.
  • The single pin tip is convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint.
  • Total anesthesia.
• Parameters:
  • Probe angle: 90°
  • Quantity of pins: 4 pins
  • Article number: GK407
  • Length: 180mm
  • Diameter: 4.021mm
• Keywords: Electromagnetic Wave Plasma Generator, Electromagnetic Frequency Plasma Generator, High Frequency Plasma Generator

Technical Parameters:

Applications:

Featuring a foot switch and optional finger switch, the Better Health plasma generator probe is a single-use device that ensures no carbonization and minimal damage to surrounding tissues. The single-pin tip makes it convenient for ablation and hemostasis of the surrounding tissue in wrist and hip joint applications. The total anesthesia feature ensures patient comfort during procedures.

The Better Health plasma generator probe is suitable for a wide range of joint applications, including knee, shoulder, hip, wrist, ankle, and elbow joints. It can be used for resection, lysis, plasty, debridement, and ablation on meniscus, as well as complete or partial resection of meniscus, meniscus finishing, and repairing. It is also suitable for ligament release or tightening and hip/wrist arthroscopy.

The working principle of the Better Health electromagnetic wave plasma generator is based on plasma technology that generates plasma energy by stimulating NaC in physiological saline with a 10DKHz square wave. The high-speed charged particles in the plasma break the molecular bonds of the human body, causing proteins and other tissues to decompose and vaporize into low molecular weight gases such as H2, O2, CO2, N2, and methane. Under a stable electric field of 100KHz square wave, particles achieve a longer acceleration time, ultimately forming speed charged particles with kinetic energy that can break molecular bonds and cause minimal damage to surrounding tissues. The treatment temperature is low, and the processes of cutting, ablation, and hemostasis are completed within 40-70℃.

The Better Health PK-100 disposable radio frequency plasma generator probe for TURP is an essential tool for medical professionals who require precision cutting, ablation, and hemostasis in a variety of joint and tissue applications. The product is available for purchase with a minimum order quantity of one set, and the price is negotiable. Payment terms include L/C, D/A, T/T, and Western Union, and the product is typically delivered within 5-8 days. The product is packaged in a paper carton and is made in China.

Support and Services:

The Radio Frequency Plasma Generator product is designed to provide high-frequency power to plasma processing systems. Our technical support team is available to answer any questions you may have about the product, as well as provide guidance on installation and operation. We also offer a range of services, including maintenance, repair, and calibration, to ensure that your plasma generator is operating at peak performance. Additionally, we provide training and consulting services to help you optimize your plasma processing applications. Contact us to learn more about our technical support and services for the Radio Frequency Plasma Generator product.

Packing and Shipping:

Product Packaging:

• Radio Frequency Plasma Generator
• Power cord
• Instruction manual

Shipping:

• Ships within 1-2 business days
• Free shipping in the continental US
• International shipping available (additional fees may apply)

FAQ:

Q: What is the brand name of the Radio Frequency Plasma Generator?

A: The brand name of the Radio Frequency Plasma Generator is Better Health.

Q: What is the model number of the Radio Frequency Plasma Generator?

A: The model number of the Radio Frequency Plasma Generator is pk-100.

Q: What certifications does the Radio Frequency Plasma Generator have?

A: The Radio Frequency Plasma Generator is certified by CE and ISO.

Q: Where is the Radio Frequency Plasma Generator manufactured?

A: The Radio Frequency Plasma Generator is manufactured in China.

Q: What is the minimum order quantity for the Radio Frequency Plasma Generator?

A: The minimum order quantity for the Radio Frequency Plasma Generator is 1 set.

Q: What is the price of the Radio Frequency Plasma Generator?

A: The price of the Radio Frequency Plasma Generator is negotiable.

Q: What are the payment terms for the Radio Frequency Plasma Generator?

A: The payment terms for the Radio Frequency Plasma Generator are L/C, D/A, T/T, and Western Union.

Q: How long does it take to deliver the Radio Frequency Plasma Generator?

A: The delivery time for the Radio Frequency Plasma Generator is 5-8 days.

Q: What are the packaging details for the Radio Frequency Plasma Generator?

A: The packaging details for the Radio Frequency Plasma Generator are paper carton.