Artificial Grass Rubber Granules Anti UV Environmentally friendly and tasteless Recyclable
Product Description
Paving 8-9mm rubber base layer ang 4-5mm EPDM surface layer with special paver machine, simple construction, good flatness with pore, water permeable, breathable, excellent elasticity. Can be all-weather use, strong wear resistance, good impact resistance, strong and durable. Economic price, better more suitable for sportscourt and playground surface.
Technical data sheet
Descripion | Artificial Grass Rubber Granules |
Color | green and other colors |
Items | Unit | Test Results |
Tensile Strength | MPA | 4-20 |
Density | g/cm³ | 1.05-1.15 |
Hardness Shore A | ShoreA | 60A±2A |
Tensile Elongation @Brk | % | 300-780 |
Tear strength | KN/m | 20-68 |
Artificial grass installation
1.Prepare and test the base ground:Inspect the foundation to ensure it has a flat and smooth surface and appropriate slopes, making sure the foundation is qualified for installing artificial grass.
2.Measuring line:Locate the centers of the ground and the two semicircles, and according to these three centers locate the intersecting point of half-way lines and touchlines, and then determine the positions of functional lines and spot by using Pythagorean proposition.
3.Palletising turf roll:According to drawing, position the turf rolls on the exact places along the touchline.
4.Cutting the edge:Cut white turf piece into strips(width to be as per actual need) for white functional lines(half-way lines, base lines etc.), and put them aside preparing for installation.
5.Cutting white line:Measure and re-position the white line on the turf that has been all well joined on the ground. Cut the turf out and place the seam tape beneath the cuts.
6.Infill rubber granules:After sand infilling, Place the rubber granules piles on the lawn on different spots evenly at a distance of 4m from each other, then spread them evenly on the lawn(the quantity of sand depends on the pile height of the turf). Afterwards, use the combing machine to sweep the sand into the fibers and to comb up the fibers. Do this process once longitudinally and transversely.
7.Brushing: to brush the grass in the vertical and horizontal one time by the grass-brushing machine
8.Check and Acceptance:Inspect the entire finished lawn as per concerned standards and requirement. If any defects found, correct it.
Quick question
Q:What is your capability per year? I have a big order!
A:Our capability is 25.000 tons per year, please don’t worry!
Q:How would you promote your company or products in the overseas?
A:I prefer to corporate with local agent. There are so many local projects and very different cultures. For me, I would like to have a local company to do local business. If you are looking for a long-term cooperation, looking for a great supplier, I am your best choice!
Product picture

