Textile Spinning Weaving Color Matching Spectrophotometer NR60CP 3nh Φ8mm Aperture Colorimeter

A Colorimetric Spectrophotometer uses a light source to illuminate the sample being measured.

The light reflected by the object passes to a grating which breaks it into its spectral components.

This sample signal falls onto a diode array, measuring the amount of light at each wavelength.

The spectral data is sent to the processor where it is multiplied with user-selected illuminant and observer tables to obtain CIE X, Y, Z color values.

Textile Spinning Weaving Color Matching Spectrophotometer NR60CP Introduction

NR60CP cost-effective colorimeter has the advantages of high accuracy, powerful function and precise measurement which are warmly welcomed by customers.

NR60CP Technical Specifications

Product Features

1. Switchable 8mm and 4mm measuring apertures, easy to measure concave surface.
2. Higher measurement stability and accuracy, Delta E ab<0.03.
3. More color spaces, various color indexes, extensive applicability.
4. Double locating: illuminating locating and cross locating
5. Configured with high-capacity rechargeable Li-ion battery
6. Built-in white plate parameters and physical white calibration board, easy to operate;
7. New integrating sphere optical path design, more stable measurement;
8. Measurement data can pass national metrology authentication.

Application Industry

NR60CP spectrophotometer is widely used in plastic, electronic, paint, ink, textile, garment, printing and dyeing, food, medical, cosmetic, industries, scientific research institutes, schools and laboratories. It can precisely measure kinds of color indexes in various color spaces and easy to use with powerful functions. The instrument is equipped with high-end color management software which can connect to PC to achieve more extension functions.

Product Details

CA (Chromatic Aberration) is the color difference. The CA (Area) value is used to measure the color difference level of the image. The lower the value, the better the quality.
0-0.5: Can be ignored, it is difficult for the naked eye to recognize
0.5-1.0: Very low, only those who have been trained for a long time can barely find out;
1.0-1.5 medium, high-rate output often seen, medium lens performance
Greater than 1.5: Severe, high magnification output is very obvious, the lens performance is poor.
The color coordinates measured by the instrument are the industry standard for calculating color latitude and color difference.
Calculation formula
Color difference formula
ΔEab=[ΔL*2+Δa*2+Δb*2]1/2

Shenzhen ThreeNH Technology Co., Ltd
Add: 4/F, Building 8, Nangang Second Industry Zone, Xili, Nanshan District, Shenzhen, 518055 China.
Tel: 0086-755-27198826 Ext: 601
Fax: 0086-755-27190609
Mobile: 0086-13510878132
Email: y@3nh.com
Skype: y@3nh.com
WhatsApp/Wechat: 86-15019429968
Website: www.3nh.com/en
http://www.3nhq.com/