Heating and 50C Hot Water 7C Cool water Heat Pump Multi-function Air Source
Quick Detail
Model data
Model | SLNA-032Ycode name.pdf | |||
Compressor capacity | 10HP | |||
Function | Heating and Cooling | |||
Electricity | 380V-3N-50Hz | |||
Working conditions | ℃ | -25~+45 | ||
Data | Heata | Nominal capacity | KW | 21.5 |
Input power | KW | 9.1 | ||
COP | / | 2.3 | ||
Heating IPLV(H) | 2.7 | |||
Coolb | Nominal capacity | KW | 25 | |
Input power | KW | 10 | ||
COP | / | 2.5 | ||
Cooling IPLV(C) | 2.7 | |||
A7W35c | KW/COP | 32.0/4.1 | ||
A2W35 | KW/COP | 27/3.60 | ||
A-7W35 | KW/COP | 21.5/2.8 | ||
A-15W55 | KW/COP | 19.7 /1.94 | ||
A-20W45 | KW/COP | 18.1/2.02 | ||
Max. running currency | A | 25 | ||
Compressor quantity | set | 2 | ||
Refrigerant/charging quantity kg | / | R22/3.7*2 | ||
Air blow type | / | Top | ||
Water pipe diameter | mm | 32 | ||
Rating flow | m³/h | 5.5 | ||
Water side pressure loss | kPa | ≤45 | ||
Noise level | dB(A) | 62 | ||
Overall dimensions(L×W×H) | mm | 1530×750×1370 | ||
Weight | kg | 320 |
Products Advantages
QC
Every process must be strictly operated and inspected by our quality persons.
Some main points as below:
1. Check all parts before assembling.
2. Charge nitrogen to test leakage and pressure maintaining after welding system.
3. Vacuumize, the vacuum pressure ≤30Pa
4. Leakage detection by halogen after charge refrigerant.
5. Safety testing: High-voltage insulation test and ground resistance.
6. 100% Operation testing, record refrigerant pressure, temp. etc.
7. Inspect inside unit’s cleanliness and appearance.