The DG25 aerial ladder fire truck use SCANIA fire truck, 4x2 drive. Two rows cab with 6 crew seats. It equipped with HG70 high strength steel made boom and imported fire fighting pump and fire monitor. Flow rate of boom is 60L/s,fighting fighting spray range over 60 meters. The vehicle was mainly used for fire fighting and fire rescue for high building and factories.
Main parameters and configuration
Vehicle | Overall | 9700X2480X3650mm |
Full load mass | 18000kg | |
Gross weight | 16800kg | |
Seat | 6 | |
Max. power | 213/290kw/hp | |
Chassis | Manufacturer | MAN |
Model | TGM 18290 | |
Drive | 4X2 | |
Cab | Double row cab | |
Wheelbase | 4425mm | |
Chassis net weight | 5818Kg | |
Max. allowable load | 12185Kg | |
Engine | 6 cylinder Straight line turbocharged diesel engine with electronically controlled common rail injection | |
Model | MAN D0836LFLAL | |
Max. power | 213Kw/ 2300r/min | |
Max. torque | 1150N.M/1200~1750rpm | |
Gearbox | ZF/9S-1310 OD | |
PTO Second PTO | ZF 109/10b ZF NL/4C |
Pipeline
Outlet pipeline | 4×DN80 ball value coupling |
Suction inlet | 1×DN125 snap-type outside suction pipeline with lid cover |
Water supply | 2×DN80 ball valve outside water supply coupling |
Working platform water outlet | 1×DN65 butterfly valve |
Fire pump
Manufacturer | US HALE |
Model | MBP |
Flow | 3600L/min |
Pressure | 1.03MPa |
Priming type | Electric vacuum pump |
Fire monitor
Model | Cyclone 35 remote control fire monitor |
Manufacturer | US TFT |
Flow | 3000L/min |
Pressure | ≤0.7MPa |
Range | water≥60m |
Pitching angle | -45°~ +90° |
Level angle | ±185° |
Pump room and storage compartment
1. Manufacturer : Shanghai Jindun Special Vehicle Equipment Co., Ltd.
2. Material
3. Structure: welding structure
4. curtain door: roller shutter.
5. ladder : left side of the front
Onboard tools
No. | Item | QTY | NOTE |
1 | Socket head wrench 3-17 | 1 | GB/T5356-1998 |
2 | Monkey wrench 150×18 | 4 | GB/T4440-1998 |
3 | Monkey wrench 300×36 | 4 | QB/T2564.4-2002 |
4 | Slot type screwdriver 50×0.4×2.5I-1P | 1 | QB/T2564.4 |
5 | Slot type screwdriver 125×0.8×5.5I-1P | 1 | QB/T2564.4 |
6 | Slot type screwdriver 250×1.6×10I-1P | 1 | QB/T2564.4 |
7 | Cross screwdriver 175C | 1 | QB/T2564.4 |
8 | Philip’s head screw 3150C-H | 1 | QB/T2564.4 |
9 | Pressure grease gun | 1 | QB/T2564.4 |
10 | Hammer 0.88kg | 1 | QB/T2564.4 |
11 | Wire-cutter 180mm | 1 | QB/T2564.4 |
12 | Pipe wrench 300 Ⅲ Z | 1 | QB/T2564.4 |
13 | Slip-joint pliers 165mm | 1 | QB/T2564.4 |
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's your main product?
A: Our main product include : water & foam tank trucks, CAFS fire trucks, chemical fire trucks, emergency rescue vehicles, lighting trucks, aerial ladder and platform trucks, airport fire trucks, water tower fire trucks and other general fire trucks. The products have been sold to more than 20 countries.
Any other questions, please do not hesitate to contact with us.