Kaeser Replacement 635710 Screw Compressor Air Oil Separator

The oil and gas separator is a device that separates the crude oil produced by the oil well from the associated natural gas. The oil and gas separator is placed between the submersible centrifugal pump and the protector to separate the free gas in the well fluid from the well fluid. The liquid is sent to the submersible centrifugal pump, and the gas is released into the annular space of the tubing and casing. Sometimes the separator is also used for the separation, buffering, and measurement of multi-phase oil, gas, water and sediment. There are roughly three forms from the appearance, vertical, horizontal and spherical.

The oil and gas separation element is a key component that determines the quality of the compressed air of an air compressor. The high-quality oil and gas separation element can not only ensure the high efficiency of the compressor, but also the life of the filter element can reach thousands of hours. The compressed air from the compressor head entrains oil droplets of various sizes. Large oil droplets are easily separated when passing through the oil-gas separation tank, while small oil droplets (suspended oil particles below 1um in diameter) must be filtered through the micron and glass fiber filter layer of the oil-gas separation filter. The oil particles are directly intercepted by the filter material through the diffusion effect of the filter material, and the mechanism of inertial collision condensation makes the suspended oil particles in the compressed air quickly condense into large oil droplets. Under the action of gravity, the oil collects at the bottom of the oil core and passes through the bottom. The inlet of the oil return pipe in the recess returns to the lubricating oil system of the machine head, so that the compressor discharges more pure and oil-free compressed air. The solid particles in the compressed air pass through the oil core and stay in the filter layer, which causes the pressure difference (resistance) of the oil core to increase continuously. As the use time of the oil separation core increases, when the pressure difference of the oil separation core reaches 0.08 to 0.1Mpa, the filter element must be replaced, otherwise the operating cost of the compressor (power consumption) will increase.

Product Description

Main products:

Filters:air filter ,oil filter,oil separator ,filter element (line filter).

Services kits: unloading valve kits, Minimum pressure valve kit,Stop oil valve kit, check valve kit,thermostat valve kit and so on.

Valve assembly:air intake valve, thermostat valve, solenoid valve, minimum pressure valve kit,blow off valve, drain valve and more.

Rubber parts: hose, coupling, elbow, anti-vibration pad, housing, belt.

Sensor: temperature sensor, pressure sensor, oil level sensor.

Other parts: gear wheel, controller, temperature switch, pressure switch, cooler ,cleaning agent.

oils: mineral oil, semi- synthetic oil.

AIR OIL SEPARATOR