Folding Separator 92735547 Ingersoll Rand Alternative Oil Separator

The fine oil separator is a part to separate screw lubricating oil and compressed air. Under normal operation, the service life of the fine oil separator is about 3000 hours, but the quality of lubricating oil and the filtration accuracy of air have a great impact on its service life. It can be seen that the maintenance and replacement cycle of the air filter element must be shortened in the harsh use environment, and even consider installing a pre-air filter. The oil separator must be replaced when it expires or when the pressure difference between the front and rear exceeds 0.12mpa. Otherwise, it will cause motor overload and oil separator damage and oil running. Replacement method: Remove the control pipe joints installed on the oil and gas barrel cover. Take out the return pipe stretched into the oil and gas barrel from the cover of the oil and gas barrel, and remove the fastening bolt of the oil and gas barrel top cover. Remove the top cover of the oil and gas barrel and take out the oil separator. Remove asbestos pad and dirt from upper cover. Install the new oil separator, pay attention to the upper and lower asbestos pads must be stapler, pressed asbestos pads must be placed neatly, otherwise it will cause punching pad. Reinstall the upper cover plate, the return pipe and the control pipe according to the original sample, and check whether there is leakage.

Advantage:

The safe and reliable separator can effectively treat solid pollutants, including mill scale, rust, dust, ground fines, corrosion by-products, paraffin and asphaltenes. Our separators are ideal for applications containing hydraulic oil, diesel oil and lubricating oil, where water is often infiltrated.