80 PLUS power supply 600w Desktop PSU RPD600-80ETN

Feature

• Worldwide Input Voltage 100Vac-240Vac
• Active PFC Within 0.99 Power Factor Correction
• Quad 12V Rails To Fulfill System Protection Demand
• Own Patent IC To Offer High Performance And Efficiency
• 12cm Fan Provide Ultra Silent User Environment

PC PSU Introduction

• Dimension 140 (L) x 150 (W) x 86 (H) mm
• Output Wattage 550W
• Efficiency 90% 92% 89%

The PC PSU DESCRIPTION

This specification describes a 550 watts power supply. With 8 output, and remote ON/OFF control for ATX-12V system and a “Power factor correction (active PFC)” circuit at 100V-240Vac

APPLICATION: Desktop

WATTAGE: 550W

DIMENSION : 140mm(L) x 150mm(W) x 86mm(H)

PRODUCT HIGHLIGHT

• Efficiency Level: 80PLUS Platinum
• Erp Lot: <0.5W
• Input Voltage: 100~240Vac

INPUT SPECIFICATION

Input Range: 100-240 Vac
Input Frequency: 47-63 Hz
Input Current: 8 Amp (maximum) at 100- 127Vrms/ 60 Hz 4Amp (maximum) at 200-240 Vrms/50 Hz. .

OUTPUT SPECIFICATION

Output Rise Time: +3.3V 20mS (maximum)

+5V 20mS (maximum)

+12V 20mS (maximum)

-12V 20mS (maximum)

GENERAL SPECIFICATION

• Efficiency:87%@ 20% load; 90%@ 50% load;87%@ 100% load
• PWOK Delay Time: 500ms > PWOK > 100ms
• EMC Performance: EN55022 class B

​ENVIRONMENTAL SPECIFICATION

• TEMP.Range: Storage Temperature: -40°C to + 70℃
• MTBF: The power supply reliability, when calculated by “Bellcore” latest revision are exceed 100,000 hours with all output at maximum load and an ambient temperature of 25℃.

Output Voltage and Current Rating

NOTES

• +3.3V & +5V total output not exceed 95W.
• When +5V is load to 16A, the +3.3V maximum load is 4.5A.
• When +3.3V is load to 16A, the +5V maximum load is 8.4A.
• +12V1 & +12V2 & +12V3 & +12V4 total output not exceed 516W(43A).

This content is subject to change, please refer to specification for more detail.