Hot Selling H610 Motherboard Intel Core 12/13th I9/I7/I5/I3/Pentium LGA1700 Motherboard Dual Channels DDR4 64G With M.2 VGA H610M-4D4-V1.1
l Support Intel LGA1700 processor
l Support dual-channel DDR4 DIMM memory
l 3× SATA socket
l 1x M.2 slot (NVME&SATA)
l The rear IO provides 6xUSB.
l 1x HDMI2.0 + 1 x VGA
l FUSB built-in pin can expand 4 USB interfaces.
l 1 M.2 WIFI interface
l 1 x Gigabit network card, supporting PXE and network wake-up function.
l 1 x PCIE4.0 X16 slot, 1 x PCIE3.0 X1 slot.
l Support 24Pin+8Pin ATX power input.
l Windows 10,Windows 11
Model Name | H610M-4D4 VER:1.1 |
Motherboard chip | Intel Q670 |
CPU | Intel Core 12/13/14th i9/i7/i5/i3/Pentium LGA1700 Pin Processor |
memory | 2*DDR4 288-Pin DIMM, 2133/2400/2666/2933/3000/3200mhz (Max) supports XMP with a maximum capacity of 64G. |
Cunzhu | 1* M.2(NVME&SATA) slot; 3*SATA 6Gb/s interface (NVME X4 Gen3 & SATA 6Gb/s) |
network | 1*Realtek Gigabit NIC chip |
Wireless interface | 1*WIFI PCIE |
PCIE slot | 1*PCIE4.0 X16 slot; 1*PCIE3.0 X1 slot |
audio frequency | 1*Line out; 1*MIC In; 1*Line In; 1*F_Audio built-in pin |
Audio chip | 1*Realtek ALC897 HD Audio Chip |
ESPI | 1 motherboard debugging interface |
Display interface | 1*HDMI2.0 ; 1*VGA (supporting synchronous dual display) |
Usb interface | IO interface: 4 * USB 2.0; 2*USB3.2 Gen2(10Gb/s) Built-in pins: 1 set of F_USB pins can expand 2 USB2.0 ports. One set of FUSB pins can expand two USB3.2 Gen1 ports (5Gb/s). |
Functional pin | 1*FPANEL panel pin; 1*4Pin buzzer pin; 1*4Pin CPU fan; 1*4Pin SYS fan; 1*3Pin SYS fan |
Power input | 24Pin+8Pin ATX power socket |
product size | ATX motherboard specification, 180 x 220 mm x 4L |
Working temperature | -10℃~60℃ |
Working humidity requirements | 10%~90% without condensation |
Storage temperature | -25℃~70℃ |
power consumption | Standby power consumption: 20~25W Full load power consumption: 230~260W (If you want to install hardware equipment with high power consumption, please use a high-power power supply.) |
other | 1*JCMOS jump cap; 1*SATA&PCIE switching jump cap |
remarks | USB1 upper port is invalid when using WIFI module. |