Industrial ATX Motherboard Intel H110 Chip lga1151 6th/7th/8th/9th GEN CPU 2LAN 6COM RS232 ATX Industrial motherboard Support RAID
Features (product features)
▲ Support Intel desktop 6th, 7th, 8th and 9th generation processors.
▲ Support dual-channel DDR4 desktop memory, and support 64GB 2666MHz DIMM at most.
▲ Support 1 front and 1 rear audio interface.
▲ Support 8 serial ports, 1 parallel port and 1 PS/2 KB&MS interface.
▲ Support 4 USB3.0 interfaces and 5 USB2.0 interfaces.
▲ Support 4 SATA interfaces and 1 M.2 interface.
▲ Support 2 PCIE interfaces, 5 PCI interfaces and 1 MINIPCIE interface.
▲ Support two RJ45 Gigabit network card interfaces.
▲ Support VGA/HDMI display interface, and support synchronous dual display.
▲ Support 1 TPM 2.0
processor | Intel Desktop 6th, 7th, 8th and 9th Generation Processors | |
CPU | Support Celeron, Pentium, I3, I5, I7 series CPU, below 65W. | |
memory | technology | Dual channel DDR4 2666MHz |
| maximum capacity | The maximum capacity is 64GB, and the maximum support for a single slot is 32GB. |
| Memory slot | 2 288Pin DDR4 DIMM(Non-ECC) slots |
Post I/O | HDMI | Standard D socket, supporting HDMI1.4, maximum resolution: 4096x2304@24Hz. |
| VGA | Standard DB15 socket, the maximum supported resolution is 2560*1600@60Hz. |
| serial port | Two standard DB9 serial ports, supporting RS232/RS422/RS485 mode (6 strings /8 strings are optional). |
| PS/2 interface | 1 PS/2-to-2 KB&MS interface |
| Ethernet | 1 IntelI211 Gigabit NIC and 1 I219V Gigabit NIC. |
| Audio | 1 rear audio interface (Line-out, Mic-in, Line_in) |
| USB port | 4 USB 3.0 interfaces and 2 USB 2.0 interfaces. |
Internal connector | USB port | 3 USB2.0 interfaces (one pin FUSB can switch out 2 USB2.0 interfaces) |
| serial port | 6 COM ports, supporting RS232 mode. |
| Audio | 1 front main audio interface and 1 SPDIF interface |
| PCIE interface | 1 16X slot and 1 4X slot (MINIPCIE interface is available when 4X slot uses 2X signal). |
| PCI interface | 5 PCI slots |
| MINIPCIE | 1 MINIPCIE interface, supporting WIFI and 4G module communication (this interface is available when 4X slot uses 2X signal). |
| serial ata | 4 7Pin SATA interfaces, supporting SATA 3.0 speed. (SATA1 and M.2 interfaces can only be selected) |
| M.2 interface | 1 M.2 interface, supporting SATA protocol. (SATA1 and M.2 interfaces can only be selected) |
| TPM interface | 1 2*10Pin TPM interface, supporting extended TPM module. |
| FP1 interface | 1 switch control panel |
| LPT interface | 1 2*13Pin parallel port |
| GPIO interface | 16 channels (2 groups of 8 channels) bidirectional 3.3V |
| RECOVERY | 1 system with one-button reset pin |