Hing Joint Field Fence, Made Of Hot-Dip Galvanized Iron Wire Used To Prevent Animals From Entering Properties

PRODUCT FEATURES

There are a few things you must pay attention to when buying Hinge Joint Wire Mesh Fence so that you don't fall for scams. Generally speaking, the thinnest wire is 1.8mm, sometimes even can not buy 1.8mm wire, the most thin and commonly used is 2mm galvanized iron wire. Moreover, the larger the mesh, the worse the installation effect of the Hinge Joint Wire Mesh Fence, it will look very thin. So, do not covets cheap, buy a large mesh, because the larger the mesh, the less material will be used, which is of course cheap. But once you see it, you'll regret it.

If you are planning to raise cattle or sheep, the mesh should not be larger than 15cm, otherwise you may encounter cattle and sheep injury every day, and you will lose more than you gain.

MASS PRODUCTION PROCEDURE

PACKAGING DETAILS

1) Nuded Packing, with label inside.

2) Plastic film only, with label inside.

3) Plastic Shrink only, with label inside.

4) Plastic woven bag, with label inside.

5) Wooden Pallet or Iron Pallet: special design to ensure the belts stable.

APPLICATIONS

Livestock fencing and confinement.

Erosion control silt fence backing.

Perimeter and boundary fence.

Deer Fencing

Horse Fencing

Cattle fence

Sheep / Goat fence

Otter Fencing

Poultry Fencing

Badger Fencing

Grasslands fence

Animal husbandry fence

Forest areas fence

Breeding fence

Green belts’fence

River embankments fence

Road bridges’ fence

RELATED PRODUCTS

1) T Post

T Post is matched and used with Hinge Joint Wire Mesh Fence, which has a steel plate on the top of the post for easier installation.

2) T Post Clip

T Post Clips allow you to easily secure the rolled Hinge Joint Wire Mesh Fence to the T-post tightly.

3) Y Post

Y Post is widely used as post for Farm Fences.

4) Post Driver

Post Driver can be used to help drill the post into ground more easily.

FREQUENTLY ASKED QUESTIONS

Q1: Is High Tensile Hinged Joint Knot Fence Different to erect?

While High Tensile Hinged joint knot fencing certainly requires different techniques to erect than mild steel, it is no more difficult. Most farms have access to a post driver that can easily drive in strainers to the required depth. Bending and tying off is simple when using the correct technique.

Q2: Isn’t High Tensile Hinged Joint Knot Fence Expensive?

It is a common misconception that a mild steel hinged joint knot fence will cost less than High Tensile. High Tensile mesh rolls may be more expensive to buy, but this is more than compensated for by the reduced numbers of posts and labour required.

Although HT8/80/15 is the most common spec used for livestock, we also offer a wide variety of specifications to suit different animals and applications. Please contact one of our fencing experts who are on hand to provide you with professional support and advice.

Q3: Are you a factory or trading company?

We are a 18-year factory and we have registered trading company for sourcing more valuable products for the customers. Therefore, we have both the advantages of factory and trading company. We have our own factory, so we can control the product quality timely and efficiently. At the same time, we also have a professional international trade team, providing good and professional services for customers.

Q4: Can you offer samples?

Yes, free sample is available according to your request. And we can also ensure that the quality of the sample is the same as that of the mass products.

Q5: How about the payment terms?

T/T (30% deposit in advance) , L/C at sight.

Q6: How about the delivery time?

Within 7-15 days after receiving customer’s deposit or L/C.

HUILONG HISTORY

• In 1989, HUILONG company was established, the original store was located in Anping Wire Mesh World Supermarket;
• In 1994, Anping HUILONG wire mesh factory was founded, located in Nanhuan East Road, mainly for the domestic market and produce Welded Wire Mesh Roll, Welded Wire Mesh Panel, and Wire Mesh Fence, etc.;
• In 1998, ethnic Chinese from Philippines visited us and confirmed the intention of cooperation;
• In 2004, Philippines invested 1 million funds, HUILONG Wire Mesh became a joint venture company named as "ANPING HUILONG WIRE MESH MANUFACTURE CO., LTD.";
• In 2008, HUILONG wire mesh international sales department successfully obtained European market, establishing a European trading circle based on France, Belgium and Italy;
• In 2009, we obtained 50 acres land in Taicheng industry park, and built up a brandnew factory. The workshop occupies 25,000㎡, warehouse 10000㎡, with total 300 sales representatives and workers；
• In 2011, our company exported to more than one hundred countries, cooperated with more than 200 customers;
• In May 2012, Shijiazhuang international trade branch office was set up;
• In 2013, we purchased 300㎡ of office building in Shijiazhuang;
• In 2015, Anping HUILONG Wire Mesh Manufacture Co., Ltd joined the Anping Wire Mesh Chamber of Commerce, becoming an important part of it;
• In 2016, we set up a new foreign trade team of 35 people, with an office area of 300 square meters;
• In 2017-2018, our wire mesh products were well sold and well recognized in the markets of America, Africa and Southeast Asia;
• In 2019, we registered AIBUER TRADING CO., LTD. and integrated more factory resources, enriched product categories, to provide customers with more valuable services;
• In 2020, HUILONG invested and established Concertina Razor Wire Factory, which covers an area of 7,000 square meters;
• In 2021, the factory department has established a domestic trade team of 30 people, with a new office area of 600 square meters.