Product Description:

Deep groove ball bearings are versatile and widely used bearings. They are particularly well-suited for high-speed and high-precision applications. Here are some key points about deep groove ball bearings:

Design: Deep groove ball bearings have raceways in the inner and outer rings that are relatively deep compared to other bearing types, allowing them to carry both radial and axial loads in various applications.
Functionality: These bearings are capable of handling high speeds and are typically used in applications where low friction and high rotational speeds are required. They can accommodate radial and axial loads in both directions.
Applications: Deep groove ball bearings are commonly found in a variety of industries and applications, including automotive, industrial machinery, electric motors, pumps, agricultural equipment, and more.
Advantages:
Versatile and can handle various loads and speeds.
Low friction.
Relatively low maintenance.
Available in a wide range of sizes and configurations.
Limitations:
Not suitable for very high loads compared to other types of bearings like spherical roller bearings or cylindrical roller bearings.
Limited ability to handle misalignment.
May not perform well under heavy shock loads.
Maintenance: Proper maintenance of deep groove ball bearings includes regular lubrication, monitoring for unusual noise or vibration, and ensuring proper alignment.
Variants: There are various variants of deep groove ball bearings, including single-row, double-row, and stainless steel versions, each designed for specific applications.

Technical Parameters:

Applications:

When selecting a deep groove ball bearing for a specific application, several factors should be considered to ensure optimal performance and longevity. Here are some key factors to keep in mind:

Load Type and Magnitude:
Determine the type of loads (radial, axial, or combined) the bearing will need to support.
Calculate the magnitude of the loads to select a bearing with the appropriate load-carrying capacity.
Speed Requirements:
Consider the rotational speed at which the bearing will operate.
Choose a bearing with a suitable design and lubrication to accommodate the required speed.
Size and Dimensions:
Ensure the bearing's dimensions, including bore diameter, outside diameter, and width, fit the application's requirements.
Select the appropriate bearing size to support the anticipated loads.
Operating Temperature:
Determine the temperature range the bearing will be exposed to during operation.
Select a bearing with suitable materials and lubrication that can withstand the operating temperature conditions.
Precision and Tolerance:
Consider the level of precision required for the application.
Choose a bearing with the appropriate tolerance class to meet the application's accuracy requirements.
Environmental Conditions:
Evaluate factors such as exposure to moisture, dust, chemicals, and other contaminants.
Select a bearing with seals or shields to protect against environmental elements.
Lubrication:
Consider the lubrication requirements of the application.
Choose a bearing with the appropriate type of lubricant (grease or oil) and lubrication method (sealed or relubricatable).
Mounting and Housing:
Ensure compatibility between the bearing and the housing in terms of fit, clearance, and alignment.
Consider the mounting method and shaft fit to prevent misalignment and premature wear.
Expected Lifespan:
Estimate the expected service life of the bearing based on the application's operating conditions.
Select a bearing with a suitable fatigue life rating to meet the desired lifespan.

Support and Services:

Product Technical Support and Services:

- Professional technical guidance and consulting services

- On-site technical support and training services

- Prompt technical response and troubleshooting services

- Customized maintenance and repair services

- Comprehensive spare parts supply services

ABOUT COMPANY

Changsha HuaYi Technology Co., LTD.,