Bus bar systems can be designed in various configurations to suit different applications and requirements:
Single Bus Bar: In a single bus bar configuration, there is a single main bus bar that carries the electrical current. This simple design is suitable for applications with relatively low power requirements and where redundancy or system flexibility is not a primary concern.
Double Bus Bar: A double bus bar configuration consists of two parallel bus bars. One bus bar acts as the primary, while the other serves as a backup or alternate power source. This configuration provides redundancy and allows for maintenance or repair work without interrupting the power supply.
Ring Bus Bar: A ring bus bar configuration forms a closed loop, where multiple bus bars are connected in a ring-like structure. This design provides redundancy and allows for multiple power sources to be connected to the system. It is commonly used in critical applications where uninterrupted power supply is essential.
Breaker-and-a-Half Bus Bar: The breaker-and-a-half configuration incorporates additional circuit breakers between the main bus bars. It provides enhanced redundancy and flexibility, allowing for selective disconnection and isolation of faulty sections while maintaining power supply to other parts of the system.
Segregated and Non-Segregated Bus Bar: In segregated bus bar configurations, the bus bars are physically separated and housed in individual compartments. This design provides increased safety by minimizing the risk of fault propagation. Non-segregated bus bar configurations have the bus bars in close proximity without physical barriers between them.
Product name: | HIGH-TRO-REEL SYSTEMS DHB |
Product number: | DHB-3-10/50 |
product material: | PVC+copper |
Minimum quantity of product: | 1m |