15A 125V AC GFCI Receptacles Duplex Tamper Resistant End Of Life Monitoring Function

• EASY INSTALLATION--Only spend as short as 10 minutes.
• COMPLETE COMPONENTS INCLUDED--2 different styles of free wall plates, decora wall plate and screwless wall plate included. Meets different install requirements.Instruction, screws and stickers included.
• TEMPER-RESISTANT(TR) AND WEATHER-RESISTANT(WR) FOR SAFETY PROTECTION--It may stop the kids use any foreign body to contact any alive parts of the receptacle from the outlets(TR). Keeps away from electrical shock.The receptacle can handle itself in the bad weather(WR).The GFCI device meets 2014 NEC (National Electrical Code), ETL standard 943 class A GFCI and 498 receptacle.
• TEST FUNCTION--The receptacle will not reset normallly if the GFCI circuit is not functioning properly.
• CERTIFICATE AND WARRANTY--We offer 1 year warranty on this GFCI receptacle and UL listed.

The Green Light is Indicator Light, when the outlet out of power, broken or end-life, the light would be off. Press the TEST button in order to trip the device ( the green light won't be off).


TEST Button & RESET Button (showed in the picture at left)

When the TEST button is pressed, the flow of electricity should be stopped, and the RESET button would be pop-out. To restore power, press the RESET button.

White Colore Switch Socket Prefab Ruffin Fixed With Stainless Stop Sleeve 1 TO 5Gang Quick Rapid Ring

Open Box Mounting Bracket Plaster Ring Assemble Switch Socket Electrical Wire 12 AWG 14 AWG Cable

UL LISTED Pre Fab Octangon Ruff In Fixing

Ruff-IN Plate Brackets & Wall stud

Increase strength and rigidity help withstand the stress of stress of drywall installation

Assemblies shipped with box installed on left side of brackets, unless othersie specified

The wall stud improved far-side support stands up during drywall,installation and out performs competitor brackets

Pre-Fab RUFF-IN products leave all the troubles in our factory, to efficiantly and save time for the end user.


Open box mounting bracket
1)Open box support allows for adjustablility of box position between studs
2) Support most North American boxes and/or plaster rings 4" SQ 4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to measure for proper install height.


Alignment plate can be cut on a mark to make shorter length brackets
Can be used with floor stand