Inductive Sensors with M12 Connector Quasi-flush Installation 10-30VDC NPN NC
The M12 inductive sensor is commonly used in automation and industrial control systems to detect the presence or position of metal objects. It features a quasi-flush mounting style, allowing the sensor to be flush with the installation surface, making it suitable for applications with limited space or where a smooth, flat appearance is required. The NPN normally open type is one of the common output configurations, where the output signal switches to a low level when a metal object is detected, enabling control and alarm functions.
■ Installation type: Quasi-flush
■ Sensing range Sn: 2mm
■ Output function: NPN,NO
■ Supply voltage: 10-30VDC
■ Connection type: M12 connector
■ Housing material: Brass,nickel-plated
Installation Type | Quasi-flush |
Sensing Range(Sn) | 2mm |
Detected Object | Magnetic metal |
Standard Detection Object(iron) | 12x12x1mm |
Set Distance | 0-1.6mm |
Tolerance Distance | Detection distance below 10% |
Response Frequency | 800Hz |
Working Voltage | 10-30VDC |
Max. load Current | 200mA |
Voltage Drop | <1V |
LED Display | Red |
Protection circuit | Surge protection circuit,short circuit protection,polarity reversal protection |
Ambient temperature | During operation:-25 to+70°C(no freezing,no condensing) |
Ambient humidity | During operation and shorage: 35-95%RH(no condensing) |
Effect of temperature | Temperature range-25 to 70°C,with a detection distance within ±10% for every 20°C change |
Effect of voltage | When the rated power supply voltage fluctuates within ±15%,the detection distance changes within ±1% |
Insulation resistance | >50MΩ |
Withstand voltage | AC1000V |
Vibration resistance | 10 to 55 Hz, up and down amplitude 1.5 mm in the X, Y, and Z directions for each 2 hours. |
Impact resistance | 500m/S ², 10 times in each direction of X, Y and Z |
Connection type | M12 Connector |
Sensing surface meterial | PBT |
Protection grade | IP67 |
Dimensional Drawing | Wiring Diagram |
![]() | ![]() |