fire resistance pu foam adhesive for Construction PU foam insulation FIRE- PROOF Polyurethane Foam sealing doors
SIWAY PU FOAM is a one-component, economical type and good performance Polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. It is environmental friendly as it does not contains any CFC materials.
1. Application where fire retardant properties are required;
2. Installing, fixing and insulating of door and window frames;
3. Filling and sealing of gaps, joint, openings and cavities;
4. Connecting of insulation materials and roof construction;
5. Bonding and mounting;
6. Insulating the electrical outlets and water pipes;
7. Heat preservation, cold and sound insulation;
8. Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure
PU foam is shaken up and down for 1 minute before use
Clean and moisturize the construction surface before application
Connect the tank upside down to the gun and turn the valve open to adjust the flow
Spray from the bottom up, the injection volume is 1/2 the required fill volume
Ten minutes after the foam began to cure, 1 hour after the next step
Cured foam can be removed with a sharp knife excess, and then in the surface with cement mortar, paint or silicone sealant for processing
Note
If you want the TDS or MSDS or other details, please contact with our sales person.