Rack And Pinion Type Mast Climbing Elevator SC300, SC300/300 60M/Min Speed
It is the truly modular rack and pinion hoist design, so the elevator drive devices and cars are generic and interchangeable.
Multiple choice of construction lifts car doors or ramps is available.
The modular and standardizing system makes the Kangbo rack and pinion elevators be flexible, efficient, low ownership cost, making them the best choice for both construction and rental companies.
Main structure frame are made of 16Mn and Q355 high strength cold roll steel plate, cut by laser, process by CNC machines in tool fixtures, welded by robots.
Technical Data
Item & Article No. | SC300BG; SC300/300BG |
Payload Capacity | 3,000 KG per Cage |
Lifting Speed | 0–60 m/min. |
Max. Lifting Height | 450m |
Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
Cage Doors | Flap type discharge door is available |
Motor Control | FC (Frequency Control) |
Engine Power | 3x23 KW per Cage |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Type of Mast | Square Column 650*650 mm with Bolted Rack |
Length Mast Section | 1.508 m |
Rack Module | 8 |