Electrical Small Crane 36 M/Min Construction Site Lift
Construction Site Lift Standard Configuration
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency Drive (VFD), with low starting current and much less wear and tear, very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
There is LED lighting inside construction elevator car.
The construction material hoist cage roof doors are equipped with Interlock.
Equipped with hoist drop test facility with remote control.
A frequency control unit (FC), with closed-loop, be equipped.
There are two accesses for Floor Selecting and Leveling:
1. Manual Control, which is direct control by the operator.
2. Computer Automatic Positioning System (Optional for order), which can easily realize floor-selecting and leveling without manual stop or point car leveling, reducing the difficulty of manipulation, convenient and precise.
Construction Site Lift Technical Data
Item & Article No. | SC200BD, MP-B05; SC200/200BD, MP-B06 Construction Site Lift |
Payload Capacity | 2,000 KG per Cage |
Lifting Speed | 0–36 m/min. |
Max. Lifting Height | 450 m |
Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter per Cage |
Cage Doors | 3 doors, Entry Door + Exit Door + Side Door |
Motor Control | FC (Frequency Control) |
Engine Power | 2x11 KW per Cage |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Type of Mast | Square Column 650*650 mm with Bolted Rack |
Length Mast Section | 1.508 m |
Rack Module | 8 |