Direct Start-Up And Stop 0–46 M/Min. Construction Hoist Elevator
Construction Hoist Elevator Introduction
Our construction elevator (lift, hoist) is also called outdoor construction elevator, which is driven by pinions & racks devices and with safe & comfortable cages. It can lift both construction materials and passengers. It bases on its mast fixed in the ground and attached to the wall, which ensure its safety
Construction Hoist Elevator Optional Configuration
Rack and pinion elevator cage flap door as loading/unloading ramp.
Sliding Contact Line (Integrated Conductive Rail or Busbar) specially for rack and pinion lifts.
An intelligent elevator control system, Multi-function Control System, with functions of fault detect, display and alarm, and automatic cage landing/stop and floor selector, is available.
Automatic greasing machine for rack and pinion elevator is availble.
Construction Hoist Elevator Technical Data
Item & Article No. | SC200BZ, MP-B07; SC200/200BZ, MP-B08 Construction Hoist Elevator |
Payload Capacity | 2,000 KG per Cage |
Lifting Speed | 0–46 m/min. |
Max. Lifting Height | 250/400 m* |
Cage Width (Internal) | 1.5 m |
Cage Length (Internal) | 3.2 m |
Cage Height (Internal) | 2.35 m |
Cage Doors | 3 Doors, Entry Door + Exit Door + Side Door |
Motor Control | FC (Frequency Control) |
Engine Power | 2x15 KW per Cage |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
Rack module | 8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |