BHFS-5-16A/80, 16mm² Busbar Power Supply Device For Rack And Pinin Hoists

Brief

The conductive rails of busbar are installed in parallel along the running track of the rack and pinion elevator lifts. And the Current Collectors are assembled on the Lifts to collect the power from the conductor.
The Current Collector operates synchronously with the moving hoist, and the power supply is obtained from the conductor at any time and/or position to make the hoist move continuously. The Sliding Contact Line is the device that composed of Current Collector, Conductive Conduits which hold Conductive Rails, and relative components.

Structure and main components /parts

As a power supply device for moving Construction Lifts, the integrated busbar, Sliding Contact Line is composed of two main parts. That is, Conductive Conduits and the auxiliary assembly, Current Collector and the auxiliary assembly.

Features

*Safety:

It is wind-proof, rain-proof and snow-proof. The use of the device will not be affected by the wind, rain or other bad weather. Its good insulation performance ensures no harm to the maintenance personnel when they touch the Contact Conduits.

*Reliability:

The Conductive Rails of Slide Contact Line are made of aluminum alloy profile, with excellent conductivity, rapid heat dissipation, low impedance and line loss. The carbon brushes of collectors are made of metal graphite material with high conductivity and high wear resistance. The moving of Current Collector is flexible and with good directional performance. The contact arc and the series arc phenomenon are effectively controlled.
*Economy:

Sliding Contact Line System is simple in structure and its Conductive Rails are with high density, low resistivity and low loss, can reduce the loss of electric energy. Its length can be added according to the height of hoist mast, which solves the problems of short work life and easy theft of the cables. At the same time, the Conductive Conduits can be segmented replaced, no need to change the whole cable in the case of local damage.

*Convenience:

The Sliding Contact Line integrates multistage Bus Bar in a Conductive Conduit, is easy to assembe. Its fixing brackets, connecting clamps and suspension devices, etc. are provided with standard components, very easy to assemble/dismantle, commissioning and repair.