Fully Intelligent Control SC200 FIC-07 Construction site Rack And Pinion Lift With Automatic Floor Doors
Features and Advantages
* Racks and Pinions are 8 Modulus, the most popular specification which is convenient for users to maintain and replace.
* The modular and standardizing system makes the Kangbo construction elevators be flexible, efficient and ownership cost.
* The passenger and material elevator is reliable with very little breakdown and is durable with very long work-life.
* Adopt helical reducers made specially for rack and pinion elevators, extremely strong, reliable and durable.
* Applying non-eccentric rollers, make the installation of construction site elevators be faster and easier, with much less error.
* The integrated elevator car roof, which made by a steel plate with edges fully welded one time to complete, enhance hoist cage strength and ensure no water leakage.
* The additional big size third door at the cage side let the users to use fork trucks to load/unload extremely heavy and big size materials.
* Easy access to electrical panels of elevator for maintenance.
* The elevators are equipped with full set of safety facilities, including centrifugal brake, limit switches, Electromechanical interlocks.
* Built-in electrical cabinet inside cage let the maintenance personnels safe and comfortable to do their jobs.
* Equipped with Fully Intelligent System, with functions including floor selection, floor calling and automatic cage landing/stop, automatic open/close cage doors and floor doors, fault detect, display and alarm, personnel biologic recognition and permissions, etc.
Technical Data
Item & Article No. | SC200 FIC-07 |
Number of Cages | Single Cage |
Payload Capacity | 2,000 KG |
Lifting Speed | 0–46 meter/minute, full loaded |
Max. Lifting Height | 250 m / 450 m * |
Cage Size (internal) | 3.2(Length)*1.5(Width)*2.35(Height) Meter |
Cage Doors | Modularized Entrance Door and Discharge Door, and Third Door at the long side of cage |
Engine Power | 2*15 KW |
Motor Control | Frequency Control (FC) |
Invertor Power (KW) | 1*37 KW |
Gearbox | Helical Gearbox |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Type of Mast | Square Column 650*650 mm with Bolted Rack |
Length Mast Section | 1.508 m |
Rack Module | 8 |
* Increased lifting height on request. 250 m with step-up transformer only. 400 m with step-up/step-down transformer. |