Mini 4P Thermal Magnetic Molded Case Circuit Breaker With Electrical Generators

GENERAL

STM1 Moulded case ciecuit breaker is suitable for circuit AC 50HZ/60HZ, rated voltage up to AC 660V,rated operating current to 630A.It features normal structure,reliable performance,compete accessories & high breaking capacity, used foe power distribution and protecting the circuit and electrical equipment against overload and short circuit. It complies with standard of IEC 60947-2 and GB14048.2

Specifications

Molded case circuit breakers can have very high current ratings, which allows them to be used in heavy duty applications. The following are some typical uses of an MCCB:

• Main electric feeder protection – The electric feeder circuits that supply power to large distribution boards normally have very high currents, of hundreds of amperes. In addition, if more circuits are added to the system in the future, it may be necessary to adjust the circuit breaker trip settings. Therefore, a molded-case circuit breaker is required.
• Capacitor bank protection – Capacitor banks are a very important component of commercial and industrial electrical systems, since they allow power factor correction – reducing line currents and preventing fees from the electric utility company. Large capacitor banks may draw high currents and will require MCCB protection.
• Generator protection – Large electrical generators may provide an output of hundreds of amperes. In addition, gen-sets are normally very expensive. The high current ratings of molded case circuit breakers allow them to provide reliable protection in this application.
• Welding applications – Some welding machines may draw very high currents that exceed the capabilities of miniature circuit breakers, requiring the use of an MCCB.
• Low current applications that require adjustable trip settings – MCCBs are not only for high current applications. There are models rated below 100 amperes for when low current equipment requires the adjustable trip settings provided by MCCBs.

Motor protection – The reliable protection capabilities of MCCBs make them an adequate choice for motor protection. A molded case circuit breaker can be adjusted to provide overload protection without tripping during the inrush current of an electric motor