Sinotruck Howo Light Duty Dump Truck 3-5 Tons For Sand And Stone Loading

Dump trucks can be divided into two categories according to their uses:
The first category belongs to heavy and super heavy dump trucks used for non-road transportation. It mainly undertakes transportation tasks such as large-scale mines and water conservancy sites, and is usually used in conjunction with excavators. This type of car is also called mine dump truck. Its external dimensions such as length, width, height, and axle load are not restricted by highway regulations, but can only be used on mines and construction sites.
The other category is light, medium and heavy general dump trucks for road transportation. It mainly undertakes the transportation of loose goods such as sand, gravel, coal, etc. Some dump trucks are designed for special purposes, so they are also called special dump trucks, such as swing-arm dump trucks and dump trucks. Figure 1 shows the structure of an ordinary dump truck.

Ordinary dump trucks are divided into:
Light dump truck (less than 3.5 tons), neutral dump truck (3.5 tons to 8 tons) and heavy dump truck (greater than 8 tons).
According to the dumping direction of the carried goods, it is divided into:
Rear-tilt, side-tilt, three-side-tilt and bottom dump trucks.
According to the structure of the carriage rail:
Dump trucks with one-sided opening, three-sided opening and dustpan (without rear panel).

Details of Sinotruck Howo Light Duty Dump Truck 3-5 Tons For Sand And Stone Loading

Sinotruck Howo Light Duty Dump Truck maintenance after receiving
1. When overhauling the automatic dump truck, the shift lever should be placed in the neutral position, and safety protection measures such as braking and wheel cover should be taken. For example, when carrying out maintenance work on the car in the lifted state of the car, effective support and other safety protection measures must be taken.
2. After the engine of the automatic dump truck is extinguished, check the ammeter for leakage. At the same time, check the cabin hoisting alarm and indicator lights in the cab, which must be complete and effective.
3. Clean the whole vehicle, check the screw tightness of various parts, check tires and steel rings, leaf springs, lifting lugs, riding bolts, etc.
4. Check the supplementary lubricating oil, fuel oil, hydraulic oil, etc., and see if there is any leakage at the joint of each pipeline.