Water Cooling Copper Melting Furnace , High Temperature Cored Induction Furnace​

1 Melting furnace

1.1 Main technical parameters
The work capacity: 2.5 - 3T;
The highest melting temperature: 1250 degrees centigrade;
The compensated power factor: 0.95-1.
The three-phase power supply. The current imbalance: less than 5%.
The detachable induction body. 600V, 250KW, 50HZ, "W" type spray flu, the inner hole is a rectangular metal
Ditch, water jacket and coil.
Oval mouth, electrolytic plate can not cut the whole hanging into the feeding.
The tilting angle: 92 degrees, which can be emptied of liquid copper furnace, and is convenient for loading and unloading induction body.

1.2 Characteristics
1. The quality of domestic production of copper cored induction furnace for furnace construction materials, improve the service life, reduce the temperature of the housing.
2. Set the auxiliary tools, convenient installation and maintenance of the sensor body.
3. The "W" type spray flu, is conducive to the molten metal liquid channel directional flow, improve the heat efficiency, reduce
Temperature difference between the upper and lower parts of the groove, and improve the service life of the induction body.

2 Holding furnace

2.1 Main technical parameters
The work capacity: 3 - 4T;
The maximum operating temperature: 1250 degrees centigrade;
Automatic / manual control of liquid temperature;
Accuracy: + 3.
The compensated power factor: 0.95-1.
The three-phase power supply. The current imbalance: less than 5%.
The detachable induction body. 50HZ, 380V, 180KW.
Can have melting and heat insulating functions.
Rearward tilting angle: 92 degrees, replacement and convenient handling induction body is convenient for crystallizer.

2.2 Characteristics
1. The quality of domestic production of copper cored induction furnace for furnace construction materials, improve the service life, reduce the temperature of the housing.
2. Set the auxiliary tools, convenient installation and maintenance of the sensor body.body weight)
Heating temperature: 1200-1300
Heat preservation temperature: 1150 ~ 1200
There is class voltage regulation: 100V~600V ten
Cooling: water cooling
The cooling water temperature that is not higher than 40 DEG (coil, water jacket, water temperature measuring device)
Cooling water: 20 ~ 40t/h
Cooling water pressure: 0.2 ~ 0.4MPa
Groove type: W type rectangular jet melting groove

Wuxi East China Furnace Co.,Ltd
Welcome to visit and inspect!

Contact person: Joey Wong

Tel: +86 510 83788308

Fax: +86 510 83786308
Mob: +86 139 2112 5611
Wechat: 86 139 2112 5611
Whatsapp: 86 139 2112 5611

email:Joey@wxhddl.cn

Joe.777@outlook.com