89mm 114mm HDPE Conveyor Roller Conveyor Idler Roller With Rust Inhibitors

76mm /89 mm /114mm /133mm Dia Rubber Lagging Impact Conveyor Idler Roller

For those who are often in contact with the construction industry, they have a certain understanding of this Impact roller group, but for people in other industries, they are unfamiliar with this product. The characteristics are also unknown. In fact, the products produced by each Impact roller group manufacturer have their unique characteristics.
Under normal circumstances, the cross section of the Impact roller is hollow, and its function is also used to transport air or some fluids. For example, we are familiar with natural gas, water, oil and gas, which are commonly used in daily life. Of course, some Solid fuel can also be transported through this Impact roller set channel.

The impact conveyor roller production process is as following:

1.Pipe Cutting: After the treatment, the pipes are cut into fixed length;

2.End Boring: In this step, boring is processed. With our automatic double end boring machine, we make sure that the roller pipe is treated under the same level;

3.Bearing Welding: Two bearings are pressed into the pipe, and welded together with the pipe;

4.rubber: As cutomers requirement we will make rubber lined, rubber rings or rubber coated on the pipe.

5.Shaft Cutting: Similar to the pipe cutting process, the shafts are cut into same length and the section is flat;

6.Shaft Milling: At this stage, the shaft is treated at two ends, making into the flat ends;

7.Final Assembling: In this last step, the pipe and the shaft are pressed into a steel tube conveyor roller with the automatic press assembling machine.

conveyor roller parameter

Product Description

1. Roller idlers Dia 89mm-219mm, length 150-3500mm, which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc

2. Tube: Q235

3. Shaft: 45# STEEL

4. Bearing: Double Row Deep Groove Ball Bearing 2RS&2Z with C3 clearance.

5. Seals: Grease retaining inner seal with Multi-stage Labyrinth and Retention Cap with Outboard

Rubbing Flinger Seal.

6. Lubrication: Grease is Lithium soap type grease with Rust Inhibitors.

7. Welding: CO2 gas shielded arc welding end

8. Painting: ordinary painting, hot galvanized painting, electric static spraying painting, baked painting