Rubber pulley lagging refers to the layer of rubber that is bonded to the shell of a conveyor pulley. Its purpose is to protect the shell of the pulley from damage, increase friction with the conveyor belt and dispense water off the pulley.

There are several different types of pulley lagging such as plain or grooved rubber lagging and ceramic lagging, which each have different variations, specifications and purposes.

Pulley Lagging is important in a belt conveying transportation system parts and components, coated rubber roller can effectively improve the operation of the transmission system, to protect metal roller from the wear and tear, can increase the friction of rubber surface, can effectively prevent the sliding friction between roller and belt.Can reduce the belt slip,reduce material bonded on the surface of the roller.So as to reduce the belt running deviation and wear and tear, improve operational efficiency, make the roller and belt synchronization operation, so as to ensure the belt operate efficiently and large capacity.

Rubber Pulley Lagging Type:

1. Plain Surface Pulley Lagging, thickness 10mm 12mm 15mm 20mm

2. Diamond Pulley Lagging, thickness 10mm 12mm 15mm 20mm

Thermal sulfide type: Traditional heat vulcanized rubber bag

Cold cure type:The new cold vulcanized rubber roller bag

Reduce Maintenance Costs

Offer superior traction - Slide lagging rubber compounding and diamond pattern grooves offer max. Traction, which can solve the problem of belt slipping.

Prolong service life- compared to cold bonding lagging method, the slide lagging fixed on the pulley surface by retainers, avoid the lagging material cracks from the metal surface. Clients don't need to cleaning drum surface when repair or replace the bad lagging materials.

Reduce Downtime

Easy operation and installation - the slide lagging can be do without removing drum from conveyor system. No need to clean up drum surface ( to bonding lagging type, clean up drum surface is very important to ensure the bonding performance)

Fast replacement - It’s more convenient and easier to replace the lagging pads when need to maintenance conveyor system, because the retainer has welded on drum surface, clients just need to take down the old / bad lagging pads, then replace the new one is ok.