S235JR Long Life Conveyor Carrier Roller For Material Handling Equipments

Long-Life Conveyor Steel Carrier Roller For Material Handling Equipments

conveyor Carrier Roller rollers for bulk materials handling applications in mining, quarrying, recycling, cement, brick,power,grain and other conveyor type handling systems. Our conveyor roller range includes carrier roller,trough roller,return roller,rubber disc impact roller and sleeve roller,friction roller,guide roller and designs with idler roller diameters from 50 mm to 219mm in both carbon steel, stainless steel,PVC,Nylon and UHMWPE (polymer) across conveyor belt width up to 3500mm.

The carrier rollers are what actually fits into the track and has a hook that hangs down from them for the curtain to hang on. On normal installations you will need to figure one carrier roller for ever 6" of curtain including curves if applicable. If you have 33 feet of curtains you will need 67 carrier rollers. Multiply the number of feet by two and add one extra for the starting roller. The carrier rollers come in packs of 10 so you would need to order 7 packages of rollers for a 33 foot curtain installation.

The 6 inch spacing is for an average weight installation. If you are using the curtain track for photograph silks that are very light you can use what ever suits your application. If you are using the curtain track to hold a small theater curtain you would need to increase the number of rollers and decrease the distance between them.

Conveyor Carrier Roller Features:

1. Manufactured by steel pipe especially for high precision roller, compared with ordinary steel pipe, the diameter and wall thickness tolerance,bending degree,ovality is very little which can make the roller have minimum radial play eccentricity,strong load,low shaking and less noise

2. High precision and brightness cold drawn shaft with 1045 material

3. Rollers are fitted with deep groove 2RS and 2Z bearing with C3 and C4 internal clearance with HRB,SKF,NSK,TNT,FAG brands.

4. Bearing Housing formed by punching many times which can assure high precision. The wall thickness is 1-2mm thicker than DIN standard which can increase 40% stability and roller’s carrying capacity. It can make the roller not deformed even working under overload environment and increase roller’s lifetime.

5. TK contact multiple labyrinth seals made of nylon,ABS have great advantage in water and dust resistance

conveyor roller Description

The basic types of rollers:

(1) The rollers are classified into self-aligning rollers, buffer rollers, trough rollers, and parallel rollers according to their uses. The function of the self-aligning roller is to correct the deviation of the belt of the belt conveyor. Usually, a rotary groove-shaped self-aligning roller is installed on the heavy-duty section of the conveyor, and a parallel self-aligning roller is installed on the no-load section. The buffer roller is applied to the tailstock of the machine according to the actual situation. When receiving the material, it can reduce the impact of the material on the belt, which is beneficial to the service life of the long belt. The trough-shaped roller is generally composed of two side rollers and a flat roller. The groove angle is generally 30 degrees. For a detachable belt conveyor, the three rollers of the trough-shaped roller are hinged to each other, so Called hinged roller. The parallel roller is generally a long roller, which is installed at the lower end under pressure, so it is called the lower roller.

(2) The rollers are divided into two types: steel rollers and plastic rollers. There are three types of bearing seats for rollers: cast iron, stamped steel plate and phenolic plast