Mining Spiral Rubber Return Rubber Disc For Conveyor Roller
Main Features of SPD Return Rubber Disc Roller
1.The bearing housing and steel tube are assembled and welded with a concentric automatic, welding machine.
2.Cuting of the steel tube and bearing is performed with the use of a digital aute device/machine/equipment.
3.Fabrication of the roller is effected by an auto device and 100% tested for its concentricity.
4.Roller and supporting components/materials are manufactured to ISO/BS/JIS/DIN//CEMA standard.
Product raw material
1 | Pipe | High precision ERW special pipe with small out of roundness. Material Q235 equal to Europe S235JR |
2 | Shaft | High precision cold-drawn round bar, Material 45# equal to DIN C45. |
3 | Bearing | Deep groove ball bearing with clearance C3. Double Seal, Quality Grade P5Z3 |
4 | Bearing House | Cold drawn steel plate, material 08AL equal to DIN ST12/14 |
5 | Inner Seal | Lip type seal, Material Nylon. |
6 | Labyrinth Seal | Main Seal System, Material is Nylon. |
7 | Lubricating Grease | #2 Long lasting lubricating grease, working condition -40°c to 180°c |
8 | Surface Treatment | Electrostatic Powder Coating |
The main performance parameters of the roller:
(1) Running resistance coefficient ≤0.03
(2) Outer circle radial runout≤0.7D (roller diameter)
(3) Water inflow ≤5g (water spray test according to national standards)
(4) Steel pipe wall thickness: when the roller diameter is 159mm and the bearing is 6308, the steel pipe wall thickness is not less than 4.5mm; when the roller diameter is 194mm and the bearing is 6308, the steel pipe wall thickness is not less than 6.3mm
(5) Bearing seat wall thickness: When the roller diameter is 159mm and the bearing is 6308, the bearing seat wall thickness is not less than 4mm; when the roller diameter is 194mm and the bearing is 6308, the bearing seat wall thickness is not less than 5mm
(6) Axial bearing capacity of roller ≥20000N
(7) Axial displacement ≤0.1mm