BHVWEQM80-800L-1/2HP Reducer Gearbox
In order to meet the needs of various industrial applications, Gong Ji has developed a series of worm gear reducers that matched international standards, With quality raw materials, experienced heat treatment as well as state of the art CNC precision grinding of the teeth of worm shafts, we can ensure smooth and efficient turning as well as long service life. Very quiet and compact. Light weight and elegant appearance. We trust it can contribute a lot to your operations,
To choose the right "GONG JI' worm gear speed reducers, please check the following parameters:
1. Input shaft rpm : when driven with shaft coupling or belt, the maximum rpm may be up to 2000, However, rpmfrom 600- 1 800 is recommended,
2. Output shaft upm: it can be calculated by the rpm of the input shaft and the speed reduction ratio,rpm of output shaft = rpm of input shaft X speed reduction ratio Special attention should be given when very low speed is required due to lower efficiency and torque, It is also more difficult for the gear to be properly lubricated.Please contact the manufacturer to choose the right model as well as the right lubrication oil,
Dimension
size | Ratio | A | AB | B | BB | BD | CC | FA | FC | FD | FE | G | GA |
40 | 1:10 1:15 1:20 1:30 1:40 1:50 1:60 | 150 | 89 | 131 | 84 | 47 | 40 | 104 | 80 | 96 | 75 | 10 | 10 |
50 | 163 | 85 | 145 | 95 | 50 | 50 | 115 | 90 | 110 | 90 | 14 | 11 | |
60 | 177 | 90 | 165 | 110 | 55 | 60 | 125 | 100 | 129 | 102 | 15 | 11 | |
70 | 211 | 117 | 195 | 130 | 65 | 70 | 155 | 120 | 155 | 120 | 18 | 15 | |
80 | 233 | 129 | 212 | 140 | 72 | 80 | 174 | 140 | 180 | 132 | 18 | 15 | |
100 | 286 | 160 | 260 | 170 | 90 | 100 | 224 | 190 | 215 | 155 | 20 | 15 | |
120 | 349 | 180 | 290 | 19o | 100 | 120 | 264 | 220 | 255 | 195 | 22 | 18 | |
135 | 373 | 201 | 320 | 210 | 110 | 135 | 304 | 260 | 285 | 230 | 23 | 18 | |
155 | 413 | 221 | 392 | 252 | 140 | 155 | 315 | 280 | 323 | 230 | 14 | 20 |
size | Ratio | HA | HB | Solid Output Shaft | Oil quantity (l) | Gross weight (kg) | |||
φS(H6) | SB | SD | SE | ||||||
40 | 1;10 1:15 1:20 1:30 1:40 1:50 1:60 | 108 | 87 | 15 | 35 | 17 | 5 | 0.38 | 5.7 |
50 | 123 | 102 | 17 | 40 | 19 | 5 | 0.30 | 6.8 | |
60 | 144 | 116 | 22 | 50 | 25 | 1 | 0.43 | 8.4 | |
70 | 170 | 135 | 28 | 60 | 31 | 1 | 0.75 | 15 | |
80 | 195 | 147 | 32 | 65 | 35 | 10 | 1.15 | 21 | |
100 | 233 | 172 | 38 | 75 | 41 | 10 | 2.15 | 41 | |
120 | 273 | 217 | 45 | 85 | 48 | 12 | 4.00 | 61 | |
135 | 308 | 252 | 55 | 95 | 60 | 15 | 5.68 | 83 | |
155 | 346 | 254 | 60 | 110 | 65 | 15 | 7.40 | 137 |
Please freference page D-24 for input flange dimensions .