Copper Granulator Machine Cable Shredder Made in China

Recycling machine for copper wires and cables

For the following materials:
1. Cable and copper wire;
2. cable and aluminum wire;
3. automatic wiring harnesses;
4. communication cables;
5. Household electrical wire;
6. computer wire;
7. Other unclassified cables that can not be treated with a wire stripping machine.

Key element:
Pre-shredder / chopper, material conveyors, granulator, separator, dust collection system, etc.

Recycling process:
1. Pre-shredding / chopping (chipper / chopper)
Shred / chop the cables into small pieces before granulating them.
2. Granulation (in granulator)
The granulator, an important part before the separation, cuts the cable so small that the wires are disengaged from the insulation;
3. Separation and dedusting (in the separator)
The granules are separated into metals and insulating materials by separation of air assisted by vibrating separation. A specially designed dust collection system will be used to collect all the dust caused.

Features:
1. It can handle single, double or multiple core, twisted or entangled wires and wires, with or without plug. The max Dia. for double-core and multicore cables, 20 mm. For single wires, the minimum diameter should be 0.2mm.
2. The shredder / chopper can turn in the opposite direction during blocking. When the granulator is overcurrent, the conveyor stops automatically.
3. The main parts will be interconnected by a screw conveyor, which will facilitate their maintenance.
4. This machine adopts air separation and vibrating in dry processing mode equipped with a dust collecting system.
5. The machine is controlled by the most advanced PLC control system by pressing the Start and Stop buttons.
6. The blades can be pushed back again and again. If used properly, their lifespan can be at least six months or longer.