Mining Drill Bit 200mm 3 Wing 4 Wing Concave PDC Drill Bit PDC Drag Bit

Details of Drag Bit

Parameter

PDC bit used for geoloical prospecting,development of oil and gas,drilling water wells,blast holes and making holes for seismic prospecting,construction engineering.now there are 2 types: Matrix and Steel Body.

Matrix PDC drill bit
The "matrix" is a very hard but quite brittle composite material, formed by metallurgical bonding of tungsten carbide particles with softer and tougher metal binders. The matrix is an ideal drill material because its hardness can resist wear and corrosion. It can withstand relatively high compressive loads, but compared to steel, its impact load resistance is lower.

The matrix is relatively heterogeneous because it is a composite material. Due to the varying sizes and positions of tungsten carbide particles contained in it (depending on design and environment), its physical properties are slightly more difficult to predict than those of steel.

In environments where corrosion of the drill body may cause drill bit failure, it is usually preferred to use PDC drill bits with tire bodies rather than steel body drill bits. For diamond drill bits, only the matrix structure can be used.

Steel PDC drill bit
Steel is opposite to the substrate. Steel can withstand high impact loads, but it is relatively soft and lacks protective functions. The strength and ductility of steel give the main body of steel drill bits high impact resistance. The steel body is much stronger than the base body.

One advantage of steel drill bits is that they can be easily rebuilt multiple times, as worn or damaged tools can be easily replaced. This is a particular advantage for operators in low-cost drilling environments.
Polycrystalline Diamond Composite (PDC) Cutting Tools
Diamonds are the hardest known material. This hardness gives it superior cutting performance compared to any other material. PDC is extremely important for drilling because it aggregates small, inexpensive artificial diamonds into relatively large randomly oriented crystal blocks, which can form useful shapes known as diamond plateaus. The diamond table is a part of the cutting teeth that come into contact with the geological formation. In addition to hardness, PDC diamond countertops also have a fundamental characteristic of drill bit cutting teeth: they can effectively bond with tungsten carbide materials that can be brazed (connected) to the drill bit body. Diamonds themselves do not bond together, nor can they be connected by brazing.