94mm Three-Wing Type PDC Drilling Drag Drill Bit , PDC Concave Drill Bit

Pdc Drill Bit Feature:

1.Suitable for soft, medium and hard formations.
2.Super strong material promotes gauge wear resistance to provide long bit life.
3.PDC cutter can improve the life and shield the risk of complex formation drill not passed.
4.Drilling dynamic equilibrium design and hydraulic balance design make the drilling process more smooth

Features of diamond concave no core drill bits:
1. Big hole design, chip space is big, high drilling efficiency in soft rock.
2. Cutting free surface, sharp blade, with self-sharpening feature, high drilling efficiency.
3. High resistance to wear.
4. According to stratum characteristics, selecting different drilling and surface structure, bit strong adaptability.
5. High effective utilization rate of drilling time and auxiliary time is short, effectively reduce the labor intensity of workers and good comprehensive benefits.

Details of Drag Bit

Specifications:

PDC bit used for geoloical prospecting,development of oil and gas,drilling water wells,blast holes and making holes for seismic prospecting,construction engineering.now there are 2 types: Matrix and Steel Body.

Matrix PDC drill bit
The "matrix" is a very hard but quite brittle composite material, formed by metallurgical bonding of tungsten carbide particles with softer and tougher metal binders. The matrix is an ideal drill material because its hardness can resist wear and corrosion. It can withstand relatively high compressive loads, but compared to steel, its impact load resistance is lower.

The matrix is relatively heterogeneous because it is a composite material. Due to the varying sizes and positions of tungsten carbide particles contained in it (depending on design and environment), its physical properties are slightly more difficult to predict than those of steel.

In environments where corrosion of the drill body may cause drill bit failure, it is usually preferred to use PDC drill bits with tire bodies rather than steel body drill bits. For diamond drill bits, only the matrix structure can be used.

Steel PDC drill bit
Steel is opposite to the substrate. Steel can withstand high impact loads, but it is relatively soft and lacks protective functions. The strength and ductility of steel give the main body of steel drill bits high impact resistance. The steel body is much stronger than the base body.

One advantage of steel drill bits is that they can be easily rebuilt multiple times, as worn or damaged tools can be easily replaced. This is a particular advantage for operators in low-cost drilling environments.
Polycrystalline Diamond Composite (PDC) Cutting Tools
Diamonds are the hardest known material. This hardness gives it superior cutting performance compared to any other material. PDC is extremely important for drilling because it aggregates small, inexpensive artificial diamonds into relatively large randomly oriented crystal blocks, which can form useful shapes known as diamond plateaus. The diamond table is a part of the cutting teeth that come into contact with the geological formation. In addition to hardness, PDC diamond countertops also have a fundamental characteristic of drill bit cutting teeth: they can effectively bond with tungsten carbide materials that can be brazed (connected) to the drill bit body. Diamonds themselves do not bond together, nor can they be connected by brazing.

Hengshui Aoxing Geological Equipment Co., Ltd has over 10 years of market experience and is a manufacturer and supplier of grouting materials and drilling materials in the fields of water conservancy, geology, mining, tunnels, subways, construction, geological exploration, mining exploration, geotechnical engineering, soil investigation, etc.

The main products include: inflatable or water filled packers, manual packers, high-pressure grouting pipes, pneumatic hoses, FULO grouting pipes, sleeve valve grouting pipes, grouting data acquisition instruments, grouting pumps, screw grouting pumps, cement mixers, high-speed grouting machines, mud stations, sprayers, Lurong test packers and Lurong test equipment, diamond drill bits, hole extenders, geological drill rods and casings, exploration drilling rigs, water well drilling rigs, engineering drilling rigs, hydraulic drilling rigs, air compressors, core barrels, salvage barrels, SPT tools, soil sampling tools, drilling tools and accessories, grouting pump accessories and drilling rig accessories, etc.

Our team is dedicated to dam curtain consolidation grouting, foundation engineering grouting, mineral exploration, soil investigation, and geological engineering. Provide solutions for engineering drilling.

We can provide accurate, valuable, and targeted solutions and services to our customers based on their specific requirements and needs.

Company Name: Hengshui Aoxing Geological Equipment Co., Ltd

Address:: Xiaoliutun Industrial Zone, Jingzhou Town, Jing County, Hengshui City, Hebei Province China

Phone: +86-15132806565

WhatsApp: +86-15132806565

Contact person:Liu Ting

E-mail: info@aoxinggeote.com

Website: www.aoxinggeote.com