3 Ply Corrugated Cardboard Production Line For Corrugated paperboard

※ZJ-V5B hydraulic shaftless mill roll stand

※structural feature:

★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.

★brake adjustable adopts multipoint braking system.

★every stand matched two sets paper car , and they can paper on the both sides at the same time.

※technical parameters:

1,the range of clamping paper:MAX1600mm MIN1000mm 2,clamping diameters:MAX￠1500mm MIN￠350mm

3,main shaft diameter of paper holder:￠240mm 4,gas source work pressure(Mpa):0.4---0.8Mpa

5,equipment size:Lmx4.3*Wmx1.8*Hmx1.6 6,single weight:MAX4000Kg

※Hydraulic system parameters:

1,Work pressure(Mpa):16---18Mpa 2,lifting hydraulic cylinder:￠100×440mm

3,Clamping hydraulic cylinder:￠63×1300m 4,hydraulic station motor power:3KW --380V -- 50Hz

5,solenoid valve voltage:220V 50 Hz

※Mainly purchased parts, raw materials and origin:

※ paper trolley, track

※structural feature:

★the whole track buried,The main frame of the 14th Channel steel with ¢ 20mm cold drawn welded round,length of track6000mm.

★each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.

※Mainly purchased parts, raw materials and origin:

※RG-1-900 top(core)paper preheater

※structural features:

★preheat roller accord the pressure container national standards,and enclose the pressure container certificates and inspection certificate.

★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.

★electromotion adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°.

※technical parameters:

1,Effective width:1600mm 2,diameter of preheat roller:￠900mm

3,angle adjustment range:360°rotation 4,angle shaft diameter:￠110mm×2

5,steam temperature:150-180℃ 6,steam pressure:0.8-1.3Mpa

7,equipment size:L_mx3.3*W_mx1.1*H_mx1.3 8,single weight:MAX2000Kg

9,working power:380V 50Hz 10,Motor power:250W short(S2)working system

※Mainly purchased parts, raw materials and origin:

※SF-320C fingerless type single facer

※structural feature:

★adopt hood suction structure,matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed.

★High quality resin sand casting,wall thickness 200mm.Adopt independent gear box, Universal joint transmission structure.

★install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick.

★Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency.

★The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry.

★Automatic circulation system for glue, two-cylinder pneumatic gluing device, with good cushioning effect.

★Glue department using integrated slide structure,Glue roller surface after grinding engraved with 25 lines and pit-style textured hard chrome plating.

★corrugated roller adopt tungsten carbide dealing,diameter of the main corrugated roller¢ 320mm,Quenched→rough car→bore fine boring→shaft head shrunk-on→welding → tempering to stress→fine cars→coarse grinding→IF quenching→CNC grinding machine grinding→tungsten carbide dealing,hardness of surface is HV58degrees.

★Active force variable frequency motor drive, energy efficient, low failure rate.

★Glue wide electric adjust to changes in the width of the paper used.

★Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy.

★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery.

Any More Interested, Kindly Communicate with us ASAP.