Semi Automatic Folder Gluer For Small Corrugated Cardboard Box Making Machine

Folder Gluer Cardboard Box Making Machine Information:

Semi-automatic sticking machine can be divided into two types: the first one is more popular in domestic use, mainly used for folding, gluing, shaping, conveying, pressing, counting, drying and other functions of the carton. The whole machine is fed by the feeding department. , glue coating part, shaping part, conveying press part, receiving count part and so on. The operation procedure is that the whole piece of cardboard that has been processed is manually folded by the worker and sent to the rubberizing part, and the glue is automatically applied to the bonding part of the cardboard by the rubberizing part, and is sent to the shaping part by the roller to form a certain number one by one, and then automatically transmitted and added. Press, blow dry and finally finish. The semi-automatic sticking machine is suitable for the outer box of the standard pair of flapping and covering one box, and the "folding line" of the carton is required to be pressed well, otherwise the stuck carton may generate waste. The machine is very suitable for paperboard after die-cutting. The maximum folding cardboard size is 1200mm×1200mm, the minimum is 400mm×400mm, and the production speed is 50-70 pieces per minute.

Working principle:
Put the prepared glue into gluer bucket,press each switch button,when everything is in order,turn on the switch below gluer bucket,enable the glue successfully into the head of gluer,then well remove carton,so one side of the carton can be well-distributed glue when across bottom of the head gluer while the other side of carton can be firmly joint together after middle press- roll pressing.

Installation and test:
1. fix the machine,adjust the screws of four corners,update balance and well fix screws.
2. go through the power line(380v pressure)together with paper conveyor,then lock up screws.
3. test at entire machine,press the switch on the front, middle and paper conveyor belt.if the conveyor belt would move normally beginning to end,it says the running direction of conveyor belt is all right.otherwise,it’s best to update power to change running direction.

Cardboard Box Folding Making Machine Main Parameter: