Fingerless Type Single Facer Corrugated Board Production Line

1.Main Features for Universal joint single facer

1. Design Speed: 80m/min
2. Effective width: 1400mm-2200mm
3.Corrugated roller:φ280mm
4. Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transmission. separate power.
5.Corrugating roller, pressure roller and glue roller by pneumatic adjustment.
6. Cardboard transmit adopt vacuum suction method, with wind control system. keep flute profiles stable of the lower-roller in the condition of running up.
7. Bearing of corrugated and pressure roller adopt high temperature lubricate grease.
8. Glue parts auto supply glue circularly.
9. The upper-lower corrugating roller are made of 52CrMo high quality alloy steel, after heat-treatment. The hardness HRC58o-60o,the surface be grinded.
10. The glue part surface are treated by special mesh snicked and chromeplated.
11. Motorized or manual glue width dividing to match the paper width.
12.Glue part can be running independently or non-independently while stopped. Adopt main motor frequency conversion control.

2. What is the Fingerless Type Single Facer Corrugated Board Production Line used for ?

Single Facer is the main machine for producing the corrugated paperboard. make single face corrugated board from flat craft paper Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.

Note : This machine can also make 3 layer 5 layer 7 layer when work together with gluing machine and pressing machine

3.What is the main structure for Fingerless Type Single Facer Corrugated Board Production Line and working principle ?

This line including paper mill roll stand and single facer machine and rotary sheet cutter

Step one : Make craft paper to mill roll stand

Step two :Heat the corrugated layer by heating shaft

Step three :Make the flat paperboard to corrugated board by corrugated shaft

Step Four : Gluing top wave by glue shaft and make this two pieces paper to monolayer corrugated board

Step Five : Cross cutting the corrguated paper to the size you want

Optional Function : Rewinder the finished corrugated paper to paper roll again

4.Fingerless Type Single Facer Corrugated Board Production Line specification

5.Finished corrugated paper made by Fingerless Type Single Facer Corrugated Board Production Line

6.Fingerless Type Single Facer Corrugated Board Production Line Whole machine view