Fully Automatic Corrugated Flexo Printing Machine , Corrugated Box Printing Machine Main Motor Frequency Convert

whole machine transmit part of the flexo printer machine
High precise gear transmit , adop 40cr alloy steel , quenching treatment , high precise grinding gear treatment process , 6 cllass accurate , the gear high strength , work steay ,wear resisting , ,lubricating adopt the sealed lubricate system ,assure the tranmit accurate and use life , hardness HRC58-62 , use life long ,can keep long time print accurate .
Installation and commissioning
If need the installtion ,buyer need pay the double way ticket , food ,hotel , 80usd /day
Note: Customer-owned prepare part
1, compressed air pipe, compressor.
2, power, wire connected to the operating cabinet and line pipeline.
3, water, water pipes.
4, water, electricity, gas foundation plane installation of civil works.
5, equipment with oil, lubricants, hydraulic oil, grease and high temperature grease.

【1】 electric control machine from the alarm bell, continuous ringing warning, to ensure the safety of workers.
【2】 drive shaft with friction clutch, to avoid misuse and damage to the machine.
【3】 pneumatic interlock device.
【4】 The host motor starts the protection device. (The machine is not locked, the host can not start running)
2 . leading edge roller type feeding system
【1】 suction auxiliary feeding paper fan 7.5KW, according to the different bending conditions of cardboard, air volume adjustment,
To ensure smooth paper supply. Use the brush to remove the cardboard surface
Dust, scraps of paper and other debris, improve the printing quality.
[2] slotted with a chain control switch, control emergency stop paper.
【3】 The paper lift and down adopt the air cylinder ,the action quickly, effort.
[4] the use of Shandong "Komori" front edge roller feed system, simple operation, high precision. The amount of extension can be adjusted, raw
Strong adaptability. Speed transmission more stable, suitable for warping, thin cardboard transmission, the effect is obvious.
【5】 side baffle, rear box position by the screw electric adjustment; front baffle upper and lower gap position manually synchronized adjustment.
【6】 skip feeding device (according to the need to choose continued or sheet feeding).
【7】 PLC control, man-machine interface, menu storage, printing plate correction, printing speed, quantity, time and the Department operation